Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

Ford F75Z-19C733-CE
Control

1997-2005 Ford F75Z19C733CE

Customer Questions & Expert Answers (18)
Ford F75Z-19C733-CE Control
Ford F75Z-19C733-CE Control
Ford F75Z-19C733-CE Control
Ford F75Z-19C733-CE Control
Ford F75Z-19C733-CE Control
  • Part Description
    Potentiometer Assembly
  • Base No.
    19C733
  • Manufacturer
    Ford
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • 1999 Lincoln Navigator Control Diagram for F75Z-19C733-CE
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for F75Z-19C733-CE

  • Vehicle Fitment

    Year Make Model Trim Engine
    2000-2005 Ford ExcursionEddie Bauer, Limited, XLS, XLT10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL
    1997-2002 Ford ExpeditionEddie Bauer, XLT8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
    1998-2002 Lincoln NavigatorBase8 Cyl 5.4 L GAS
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Can you verify if F75Z-19C733-CE is the right one for my car? Posted by FordPartsDeal Specialist
    A:
    Select Your Vehicle model to verify if part number F75Z-19C733-CE fits your car.
    Posted by FordPartsDeal Specialist
    Q:
    How to Service and Repair Blower Control Switches on Ford Expedition? Posted by Customer
    A:
    Begin the blower motor switch servicing process by first extracted the control assembly followed by removal of the function selector by pressing down the snap tabs then keep a note that the knob will fall off during extraction. The temperature blend control switch can be removed by unscrewing and rotating the member while gently pulling it out. The knob will also fall off during this step. The blower motor switch removal procedure starts by disengaging the snap tabs followed by pulling it out the unit. The knob emerges automatically during this process. Reinstall the system by executing the opposite steps of removal to finish the sequence.
    Posted by FordPartsDeal Specialist
    Q:
    What should you do after removing the assembly for the 2004 Ford Excursion? Posted by Customer
    A:
    Disconnect the electrical connectors.
    Posted by FordPartsDeal Specialist
    See expert answers on similar A/C Switch
    Q:
    What should be removed after the control assembly for the 2004 Ford Excursion? Posted by Customer
    A:
    The knobs should be removed next.
    Posted by FordPartsDeal Specialist
    See expert answers on similar A/C Switch
    Q:
    How do you complete the process after removing the components for the 2005 Ford Excursion? Posted by Customer
    A:
    Install the components by reversing the removal steps.
    Posted by FordPartsDeal Specialist
    See expert answers on similar A/C Switch
    Q:
    What is the first step to service and repair the air conditioning switch for the 2001 Ford Excursion? Posted by Customer
    A:
    Begin by removing the control assembly and the knobs.
    Posted by FordPartsDeal Specialist
    See expert answers on similar A/C Switch
    Q:
    What is the first step to service and repair the rear control assembly for the 2002 Ford Excursion? Posted by Customer
    A:
    Remove the auxiliary climate control assembly by pulling down on the front and sliding it forward and downward.
    Posted by FordPartsDeal Specialist
    See expert answers on similar A/C Switch
    Q:
    What is the first step to service and repair the control assembly for the manual A/C for the 2003 Ford Excursion? Posted by Customer
    A:
    Begin by removing the control assembly itself.
    Posted by FordPartsDeal Specialist
    See expert answers on similar A/C Switch
    Q:
    How do you remove the EATC module for the 2002 Ford Expedition? Posted by Customer
    A:
    Disconnect the electrical connectors, remove the nuts, and disconnect the vacuum harness connector.
    Posted by FordPartsDeal Specialist
    See expert answers on similar A/C Switch
    Q:
    What should you do after removing the blend door potentiometer for the 2000 Ford Excursion? Posted by Customer
    A:
    Depress the tabs to detach the blower motor control switch and the damper door switch.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Blower Control Switches
    Q:
    What is the first step to service and repair the auxiliary climate control for the 2000 Ford Excursion? Posted by Customer
    A:
    Begin by removing the screw and disengaging the clips to lower the overhead console.
    Posted by FordPartsDeal Specialist
    See expert answers on similar A/C Switch
    Q:
    How do you complete the installation for the 2005 Ford Excursion? Posted by Customer
    A:
    Reverse the removal procedure.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Blower Control Switches
    Q:
    How do you detach the center instrument panel finish panel for the 2001 Ford Expedition? Posted by Customer
    A:
    Rotate the vents inward, grasp the panel through the vent openings, and pull it outward.
    Posted by FordPartsDeal Specialist
    See expert answers on similar A/C Switch
    Q:
    What is the procedure for installation for the 2001 Ford Excursion? Posted by Customer
    A:
    Reverse the removal procedure.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Blower Control Switches
    Q:
    What should you do for installation for the 2000 Ford Expedition? Posted by Customer
    A:
    Reverse the removal procedure.
    Posted by FordPartsDeal Specialist
    See expert answers on similar A/C Switch
    Q:
    What is the next step after removing the function selector for the 2001 Lincoln Navigator? Posted by Customer
    A:
    Remove the temperature blend control switch by unscrewing it and then rotating and pulling it out, with the knob also dropping off.
    Posted by FordPartsDeal Specialist
    See expert answers on similar A/C Switch
    Q:
    What is the procedure for installation for the 2002 Lincoln Navigator? Posted by Customer
    A:
    Reverse the removal procedure.
    Posted by FordPartsDeal Specialist
    See expert answers on similar A/C Switch
    Q:
    How do you remove the center instrument panel finish panel for the 2000 Lincoln Navigator? Posted by Customer
    A:
    Carefully pry to release the four clips.
    Posted by FordPartsDeal Specialist
    See expert answers on similar A/C Switch
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Ford Control F75Z-19C733-CE Designed for Proper Fit and Performance

The Ford part F75Z-19C733-CE Control as a genuine Ford A/C Switch, Blower Control Switches component delivers both authenticity and reliability. This item carries a warranty from the manufacturer which guarantees 12-month, 12,000-mile of use. The Ford F75Z-19C733-CE Control is used with Ford Excursion, Expedition vehicles and Lincoln Navigator models. The original Ford part will bear the manufacturer part number: F75Z-19C733-CE and where it is made at Ford. It has the code: 19C733.
This component has dimensions of 3.2 x 1.7 x 2.6 inches and its weight is approximately 0.20 Pounds. The part F75Z19C733CE is available in New condition while meeting the standards of the product rating. The Potentiometer Assembly belongs to the Direct Replacement category to guarantee it is suitable for its specific vehicle applications. This part F75Z-19C733-CE can be vital. The inventory reference for this item is SKU: F75Z-19C733-CE. The Ford manufacturer issues a factory warranty for this component which ensures dependable operation and peak performance. You can find delivery and returns information on our Shipping Policy and Return Policy pages.
Original equipment manufacturer parts are of the top standards and their performance is outstanding and top notch. This is explained by the fact that they follow the official manufacturing techniques of Ford, use of premium material and meets high standards of quality. Our site is worth visiting, in case you need high-quality and affordable OEM Ford components. We promise the optimal priced Ford parts on a wide range. You can relax that all OEM products you buy from us include a manufacturer warranty and will be covered by our simple and easy-to-use return policy, so you will not worry about buying a part.