Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

Ford 4L3Z-9D653-BA
Vapor Canister

2004-2008 Ford 4L3Z9D653BA

Customer Questions & Expert Answers (4)
Ford 4L3Z-9D653-BA Vapor Canister
  • Part Description
    Reservoir Assembly; Vapor Canister Purge Solenoid
  • Base No.
    9D653
  • Manufacturer
    Ford
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers

  • 4L3Z-9D653-BA Vapor Canister is Ref No. 11 in the diagram below

    2005 Ford F-150 Vapor Canister Diagram for 4L3Z-9D653-BA
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 4L3Z-9D653-BA

  • Product Specifications

    BrandGenuine Ford
    Base No.9D653
    Manufacturer Part Number4L3Z-9D653-BA
    Part DescriptionReservoir Assembly; Vapor Canister Purge Solenoid
    Other NamesCanister
    Manufacturer NoteVapor Canister
    Item Dimensions7.3 x 5.0 x 29.7 inches
    Item Weight5.70 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerFord
    SKU4L3Z-9D653-BA
    WarrantyThis genuine Ford part is guaranteed by Ford's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65

  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2008 Ford F-150FX2, FX4, Harley-Davidson Edition, King Ranch, Lariat, Limited, STX, THE 60TH ANNIVERSARY EDITION, XL, XLT6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
    2004 Ford F-150 HeritageSVT Lightning, XL, XLT6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
    2006-2008 Lincoln Mark LTBase8 Cyl 5.4 L GAS

  • Customer Questions & Expert Answers

    Q:
    Is this 4L3Z-9D653-BA compatible with my car? Posted by FordPartsDeal Specialist
    A:
    Select Your Vehicle model to verify if part number 4L3Z-9D653-BA fits your car.
    Posted by FordPartsDeal Specialist
    Q:
    How to service the Vapor Canister on Lincoln Mark LT? Posted by Customer
    A:
    Service of the evaporative emission control canister starts with placing the vehicle into NEUTRAL position and hoisting it up before disconnecting the battery ground cable to avoid potential fuel vapor ignition caused by electrical sparks. The EVAP canister assembly requires accessing through removing the spare tire since it is positioned above the tire compartment. Separate the quick-connect coupling of the fuel vapor tube from the fuel vapor hose. The first step involves removing the two bolts which secure the EVAP canister assembly front brackets while torquing them to 13 Nm (10 lb-ft) when reinstalling. During installation tighten the EVAP canister assembly bracket bolts first using 20 Nm (15 lb-ft) and then follow with 13 Nm (10 lb-ft) when installing the inner bolts. You should lower the EVAP canister assembly just enough to disconnect the EVAP canister vent solenoid electrical connector and take out its retaining pushpin. First disconnect the EVAP filter-to-EVAP canister hose and then remove the EVAP canister assembly together with the EVAP canister heat shield. The service completion requires performing the removal steps in reverse order.
    Posted by FordPartsDeal Specialist
    Q:
    What components should be taken out during the process for the 2005 Ford F-150? Posted by Customer
    A:
    The EVAP canister assembly and the heat shield.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Vapor Canister
    Q:
    What about the inner rear EVAP canister assembly bracket bolts for the 2008 Lincoln Mark LT? Posted by Customer
    A:
    Remove the two inner rear EVAP canister assembly bracket bolts and tighten them to 13 Nm (10 lb-ft).
    Posted by FordPartsDeal Specialist
    See expert answers on similar Vapor Canister
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Ford 4L3Z-9D653-BA, Excellent Performance and Perfect Fitment

To ensure reliability, purchase Ford part # 4L3Z-9D653-BA Vapor Canister. It is sometimes referred to as Ford Vapor Canister. For those Ford owners who aspire to maintain their vehicles in optimal shape, opting for OEM parts is a wise choice. Precisely engineered, these components adhere to stringent factory guidelines and are produced in state-of-the-art facilities using cutting-edge technologies. Moreover, they are subjected to thorough testing to certify their resilience and safety, thereby making them a dependable option for Ford owners.

FordPartsDeal.com is a leading supplier of genuine Ford parts such as Ford 4L3Z9D653BA Vapor Canister. A vast selection of genuine Ford parts is available on our website, all offered at discounted prices. Every OEM Ford part is covered by the manufacturer's warranty, which also applies to our hassle-free return policy. Enjoy fast delivery service, ensuring you get your parts when you need them. Your shopping experience here is guaranteed to be pleasurable. For detailed Ford parts information, click here.
Choose FordPartsDeal for discounted prices, exceptional service and fast delivery