Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

Ford F49Z-19986-A
Fan Switch

1986-2023 Ford F49Z19986A

Customer Questions & Expert Answers (19)
Ford F49Z-19986-A Fan Switch
Ford F49Z-19986-A Fan Switch
Ford F49Z-19986-A Fan Switch
Ford F49Z-19986-A Fan Switch
  • Part Description
    Switch Assembly; HVAC Blower Control and Motor Switch; A/C Heater Motor Switch; Climate Control Module; Blower Resistor
  • Base No.
    19986
  • Replaces
    E6DZ-19986-A, YH-445
  • Manufacturer
    Ford
Make sure this part fits
$24.41 MSRP: $38.76
You Save: $14.35 (38%)
Ships in 1 Business Day
1
ADD TO CART
  • 2021 Ford E-350 Super Duty Fan Switch Diagram for F49Z-19986-A
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for F49Z-19986-A

  • Vehicle Fitment

    Year Make Model Trim Engine
    1992-1997 Ford AerostarBase, Eddie Bauer, XL, XL Plus, XL Sport, XLT, XLT Plus, XLT Sport6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
    2003-2014 Ford E-150Base, Chateau, XL, XLT6 Cyl 4.2 L GAS, 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
    1997-2002 Ford E-150 EconolineBase, XL6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L GAS
    1997-2002 Ford E-150 Econoline Club WagonChateau, Custom, XL, XLT6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L GAS
    2003-2014 Ford E-250Base6 Cyl 4.2 L GAS, 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
    1997-2002 Ford E-250 EconolineBase, XL6 Cyl 4.2 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
    1997-1998 Ford E-350 EconolineBase, XL10 Cyl 6.8 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS, 8 Cyl 7.3 L DIESEL
    1997-2002 Ford E-350 Econoline Club WagonChateau, Custom, XL, XL HD, XLT, XLT HD10 Cyl 6.8 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS, 8 Cyl 7.3 L DIESEL
    2021-2023, 1999-2019 Ford E-350 Super DutyBase, Chateau, XL, XLT10 Cyl 6.8 L CNG, 10 Cyl 6.8 L GAS, 10 Cyl 6.8 L LPG, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG, 8 Cyl 6.0 L DIESEL, 8 Cyl 6.2 L FLEX, 8 Cyl 7.3 L DIESEL, 8 Cyl 7.3 L GAS
    1987-1993 Ford MustangGT, LX, SVT Cobra, SVT Cobra R4 Cyl 2.3 L GAS, 8 Cyl 5.0 L GAS
    View More
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Can you verify if F49Z-19986-A is the right one for my car? Posted by FordPartsDeal Specialist
    A:
    Select Your Vehicle model to verify if part number F49Z-19986-A fits your car.
    Posted by FordPartsDeal Specialist
    Q:
    How to Service and Repair Blower Control Switches on Ford E-150 Econoline? Posted by Customer
    A:
    The first step to work on the blower motor switch involves removing the ground battery cable. Begin the service by taking out the control assembly and center trim panel through unscrewing. Start by removing the knob of the A/C-heater function selector switch together with disconnecting the vacuum harness and electrical connectors. Unplug the A/C-heater function selector switch connector before unscrewing the switch from its place. First unscrew then remove the temperature control switch knob followed by disconnecting its connector until removing it by unscrewing the switch. First disconnect the heater blower motor switch knob followed by removing its connector. The part number 18578 heater blower motor switch needs to be unwired before you unscrew it from its current position. Remove the heater blower motor switch resistor (part number 18591) by unscrewing it after disconnecting its resistor connector. Rejunite all components through reversing the steps of removal.
    Posted by FordPartsDeal Specialist
    Q:
    How to Remove and Repair the A/C Switch in a Control Assembly on Ford E-150? Posted by Customer
    A:
    The first step for repairing the control assembly involves disconnecting the battery ground cable. You must first disconnect the battery ground cable before you remove the center trim panel and control assembly through standard screw removal until it can be taken out. The procedure begins by removing the A/C-heater function selector switch knob followed by disconnecting both the vacuum harness and A/C-heater function selector switch connectors to complete the switch removal by unscrewing it. First detatch the temperature control switch knob followed by disconnecting its connector and then extracting the switch by removing a screw. Disconnect the heater blower motor switch knob before removing its connector and unscrewing the switch to extract it. Follow the reverse sequence of the steps used for removal to install the components.
    Posted by FordPartsDeal Specialist
    Q:
    How to Service and Repair the A/C Switch Control Assembly on Ford E-250 Econoline? Posted by Customer
    A:
    Service and repair operations on the HVAC control assembly start with disconnecting the ground cable from the battery. The service begins with pulling off the headlamp switch knob followed by counterclockwise rotation of the headlamp switch bezel to disconnect it. The servicing process begins with removing the instrument panel finish panel after disconnecting its electrical connectors and unscrewing the screws. Begin by opening the control assembly through the unscrewing of its screws followed by removal. The most important step is to separate the vacuum harness from electrical connectors where you must disconnect both the vacuum harness connector and electrical connectors. Installation requires the opposite steps of removal steps to be followed.
    Posted by FordPartsDeal Specialist
    Q:
    How to Service and Repair Blower Control Switches on Ford E-250 Econoline? Posted by Customer
    A:
    The service and repair process of the blower motor switch requires disconnecting the battery ground cable as the first step. The next step requires removal of center trim panel and control assembly through the necessary screw removal process. The next operation requires disconnecting both the vacuum harness connector and the A/C-heater function selector switch connector after removing the selector switch knob. Begin by removing the A/C-heater function selector switch through its screw removal. Begin by first removing the temperature control switch knob before disconnecting its connector and finally unscrewing it to remove the temperature control switch. Start by disconnecting the heater blower motor switch knob then disconnecting its connector before unscrewing it from its position. Unscrew the component from its position for reverse installation.
    Posted by FordPartsDeal Specialist
    Q:
    How to service and repair the A/C Switch in the climate control assembly on Ford E-250? Posted by Customer
    A:
    The instrument cluster finish panel has to be removed before beginning service and repair operations on the climate control assembly. The first step is to unscrew three screws fastening the climate control assembly after which you must carefully uninstall the assembly. The process for assembling the new replacement demands re-execution of steps which had been used during disassembly.
    Posted by FordPartsDeal Specialist
    Q:
    How to Service and Repair Blower Control Switches on Ford E-250? Posted by Customer
    A:
    The first step for maintaining the blower motor switch consists of removing the climate control assembly. The first step in servicing the blower motor switch requires removal of the switch knob followed by the extraction of the blower motor switch after unscrewing the screw. After removing components from the new switch installation process you can put it in place by following the reverse sequence.
    Posted by FordPartsDeal Specialist
    Q:
    How to Service and Repair the A/C Switch on Ford E-150 Econoline? Posted by Customer
    A:
    You should start the repair process of the air conditioning switch by taking out the battery ground cable. The initial service requires removal of center trim panel and control assembly by unscrewing their required screws. Disassemble the A/C-heater function selector switch operation by first turning the knob and disconnecting its vacuum harness connector and A/C-heater function selector switch connector before removing the switch through unscrewing. Start by taking off the temperature control switch knob followed by connector disconnect and the switch needs to be unscrewing for removal. Begin by removing the heater blower motor switch knob before disconnecting its connector and removing the heater blower motor switch through unscrewing. The reverse steps used during removal will be applied during installation.
    Posted by FordPartsDeal Specialist
    Q:
    How do you remove the A/C-heater function selector switch for the 2004 Ford E-150? Posted by Customer
    A:
    First, remove the screw and then take out the switch itself.
    Posted by FordPartsDeal Specialist
    See expert answers on similar A/C Switch
    Q:
    How do you remove the climate control assembly for the 2004 Ford E-250? Posted by Customer
    A:
    Unscrew it and disconnect the vacuum and electrical connectors.
    Posted by FordPartsDeal Specialist
    See expert answers on similar A/C Switch
    Q:
    What should be done after removing the headlamp switch bezel for the 2005 Ford E-250? Posted by Customer
    A:
    Remove the audio unit and the instrument panel finish panel by unscrewing the screws and disconnecting the electrical connectors.
    Posted by FordPartsDeal Specialist
    See expert answers on similar A/C Switch
    Q:
    How do you install the components after servicing for the 2001 Ford E-250 Econoline? Posted by Customer
    A:
    Reverse the removal procedure.
    Posted by FordPartsDeal Specialist
    See expert answers on similar A/C Switch
    Q:
    How do you install the new or repaired climate control assembly for the 2007 Ford E-150? Posted by Customer
    A:
    Reverse the steps taken during removal.
    Posted by FordPartsDeal Specialist
    See expert answers on similar A/C Switch
    Q:
    What is the first step to service and repair the climate control assembly for the 2008 Ford E-150? Posted by Customer
    A:
    Remove the instrument cluster finish panel.
    Posted by FordPartsDeal Specialist
    See expert answers on similar A/C Switch
    Q:
    What should be done after removing the rear climate control panel for the 2001 Ford E-250 Econoline? Posted by Customer
    A:
    Disconnect the electrical hard-shell connectors, which includes the heater blower motor switch connector and the lamp connector.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Blower Control Switches
    Q:
    What needs to be disconnected after removing the control assembly for the 2000 Ford E-150 Econoline? Posted by Customer
    A:
    The vacuum harness and electrical connectors.
    Posted by FordPartsDeal Specialist
    See expert answers on similar A/C Switch
    Q:
    How do you install the components after servicing for the 2002 Ford E-250 Econoline? Posted by Customer
    A:
    For installation, reverse the removal procedure.
    Posted by FordPartsDeal Specialist
    See expert answers on similar A/C Switch
    Q:
    What is the next step after removing the temperature control switch for the 2001 Ford E-150 Econoline? Posted by Customer
    A:
    Take off the heater blower motor switch knob.
    Posted by FordPartsDeal Specialist
    See expert answers on similar A/C Switch
    Q:
    How do you remove the blower motor switch for the 2009 Ford E-150? Posted by Customer
    A:
    Unscrew the screw and take out the switch.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Blower Control Switches
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Ford Fan Switch F49Z-19986-A Designed for Proper Fit and Performance

The Ford part F49Z-19986-A Fan Switch as a genuine Ford A/C Switch, Blower Control Switches component delivers both authenticity and reliability. This item carries a warranty from the manufacturer which guarantees 12-month, 12,000-mile of use. The Ford F49Z-19986-A Fan Switch is used with Ford Mustang, Taurus, Aerostar vehicles and Mercury Sable models. The original Ford part will bear the manufacturer part number: F49Z-19986-A and where it is made at Ford. It has the code: 19986.
This component has dimensions of 3.1 x 1.7 x 2.6 inches and its weight is approximately 0.40 Pounds. The part F49Z19986A is available in New condition while meeting the standards of the product rating. The Switch Assembly; HVAC Blower Control and Motor Switch; A/C Heater Motor Switch; Climate Control Module; Blower Resistor belongs to the Direct Replacement category to guarantee it is suitable for its specific vehicle applications. This part F49Z-19986-A can be known as Blower Motor Switch; Blower Control Switch, and it replaces E6DZ-19986-A, YH-445. The inventory reference for this item is SKU: F49Z-19986-A. The Ford manufacturer issues a factory warranty for this component which ensures dependable operation and peak performance. You can find delivery and returns information on our Shipping Policy and Return Policy pages.
Original equipment manufacturer parts are of the top standards and their performance is outstanding and top notch. This is explained by the fact that they follow the official manufacturing techniques of Ford, use of premium material and meets high standards of quality. Our site is worth visiting, in case you need high-quality and affordable OEM Ford components. We promise the optimal priced Ford parts on a wide range. You can relax that all OEM products you buy from us include a manufacturer warranty and will be covered by our simple and easy-to-use return policy, so you will not worry about buying a part.