Ford F7RZ-9A758-AE
Throttle Cable

A technician should start the accelerator pedal repair by disconnecting the accelerator assembly from the throttle body. Start the service by extracting the accelerator cable and accelerator bracket clip and taking out the complete assembly. The pedal neutralization process begins by separated the accelerator cable from the throttle linkage and unfastening it from the spark plug cover area. After disconnecting the accelerator cable from the pedal you must both detach the cable housing from the bulkhead and free the cable assembly. The cable assembly will benefit from an attached feed line when performing installation tasks. To reinstall the assembly follow all previously performed uninstallation steps in reverse order.

The throttle assembly service requires starting the process by disconnecting the accelerator from the throttle body. Remove the clip from the accelerator bracket after which remove the accelerator cable assembly. Detach the accelerator cable from its position at the throttle linkage and then remove it from the spark plug cover. Detach the accelerator cable from the pedal before releasing the cable housing from the bulkhead to take out the cable assembly. Assembling the cable becomes simpler with proper addition of a feed line attached to the cable. The installation process should be done by reversing all steps from removal.

Service and repair of the throttle cable and linkage starts with disconnecting the accelerator cable from the engine cover followed by elimination of the intake air resonator. The first step is disconnecting the accelerator cable retaining clip then removing the part from the bracket and fully extracting it. The repair of the accelerator cable requires unhooking it from both the throttle body and pedal followed by freeing the cable housing from the bulkhead until you can take out the complete assembly. A draw cord should be attached to the accelerator cable during engine work to make installation easier. To reinstall the components follow all steps in the reverse order of removal.

The repair and service of the accelerator pedal cable starts by disconnecting it from the engine cover then the intake air resonator. First disconnect the accelerator cable retaining clip while removing the cable from the bracket by pulling it completely out. The operation to service the accelerator pedal requires disconnection of the throttle body cable from the pedal before removing the bulkhead cable housing for full assembly removal. A draw cord securely attached to the accelerator cable will help installation processes. Follow the opposite sequence of steps needed during removal to install the system.

The service and repair of throttle cable and linkage begins with the removal of the engine cover and intake air resonator followed by cable detachment from its position. Obtain the accelerator cable retaining clip before detaching the accelerator cable from its bracket while pulling it entirely free from the bracket. Remove the complete accelerator cable assembly by separating it from the throttle body and pedal before releasing the bulkhead housing of the cable housing. A draw cord should be applied to the accelerator cable to simplify its later reinstallation. Follow the opposite steps to install after removal has occurred.

The throttle assembly service requires starting the process by disconnecting the accelerator from the throttle body. Remove the clip from the accelerator bracket after which remove the accelerator cable assembly. Detach the accelerator cable from its position at the throttle linkage and then remove it from the spark plug cover. Detach the accelerator cable from the pedal before releasing the cable housing from the bulkhead to take out the cable assembly. Assembling the cable becomes simpler with proper addition of a feed line attached to the cable. The installation process should be done by reversing all steps from removal.

A technician should start the accelerator pedal repair by disconnecting the accelerator assembly from the throttle body. Start the service by extracting the accelerator cable and accelerator bracket clip and taking out the complete assembly. The pedal neutralization process begins by separated the accelerator cable from the throttle linkage and unfastening it from the spark plug cover area. After disconnecting the accelerator cable from the pedal you must both detach the cable housing from the bulkhead and free the cable assembly. The cable assembly will benefit from an attached feed line when performing installation tasks. To reinstall the assembly follow all previously performed uninstallation steps in reverse order.