How to Service and Repair the Accelerator Cable on Ford Ranger?

The service process for the accelerator pedal cable starts with the removal of screws from the accelerator control splash shield. The following step involves separating the accelerator cable from its position on the throttle lever. Depress the tabs for cable detachment from the accelerator cable bracket while keeping in mind that the process works equally for both 3.0L and 2.5L engines. The following step involves removing the accelerator cable from the accelerator pedal and shaft by using the depress clips method. Follow the opposite sequence of removal steps to install the components.

How to Service and Repair the Accelerator Cable on Ford Mustang?

Service and repair of the accelerator pedal cable requires starting with pushing the nylon bushing out from the accelerator pedal and shaft arm combination. The first step includes unbolting the accelerator cable at the dash panel before extracting the cable. Remove the accelerator cable from its throttle body connection by compressing the locking tabs. At the same time, remove the cable from the bracket. Pulling the cable through the bracket completes the cable removal. Reversing all steps of removal will complete the installation.

How to Service and Repair the Accelerator Cable on Ford Explorer?

Service and repair of the accelerator pedal cable requires first removing the bolt and the accelerator control splash shield. The first step involves removing the throttle body connection of the accelerator cable before separating cable section B from section A of the speed control actuator. The next step involves disconnecting the accelerator cable both from the accelerator pedal along with the shaft. Put the accelerator cable through the dash panel opening by collapsing clippings found at the dash panel. In order to install the component follow the steps in reverse order from removal.

OEM Ford Accelerator Cable

Choke Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

68 Accelerator Cables found

View related parts
Ford Throttle Cable
Part Number: 6L5Z-9A758-A
$28.46 MSRP: $52.89
You Save: $24.43 (47%)
ADD TO CART
Product Specifications
- Other Name: Cable Assembly - Throttle Control; Cruise Control Cable; Cable Assembly
- Replaces: 3L5Z-9A758-BA
Fits the following Ford Models:
- Ranger | 2001-2011 | Sport, STX, XL, XLT | 4 Cyl 2.3 L GAS
View related parts
Ford Throttle Cable
Part Number: 6L3Z-9A758-B
$34.34 MSRP: $62.72
You Save: $28.38 (46%)
ADD TO CART
Product Specifications
- Other Name: Cable Assembly - Throttle Control
- Replaces: 1L3Z-9A758-BA, XL3Z-9A758-BA
Fits the following Ford Models:
- F-150 | 1999-2004 | Base, FX4, Harley-Davidson Edition, King Ranch, Lariat, Lightning, STX, XL, XLT | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
- F-150 Heritage | 2004 | SVT Lightning, XL, XLT | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
- F-250 | 1999 | Base | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
View More
View related parts
Ford Throttle Cable
Part Number: 4L5Z-9A758-AA
Product Specifications
- Other Name: Cable Assembly - Throttle Control
- Replaces: 2L5Z-9A758-AA
Fits the following Ford Models:
- Ranger | 2004-2008 | Edge, Sport, STX, Tremor, XL, XLT | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
Ford Throttle Cable
Part Number: 1F2Z-9A758-AA
Product Specifications
- Other Name: Cable Assembly - Throttle Control
- Replaces: YF2Z-9A758-AA
Fits the following Ford Models:
- Windstar | 2000-2003 | Base, Limited, LX, SE, SE Sport, SEL | 6 Cyl 3.8 L GAS
View related parts
Ford Throttle Cable
Part Number: 1L2Z-9A758-BC
Product Specifications
- Other Name: Cable Assembly - Throttle Control
Fits the following Ford Models:
- Explorer | 2002-2005 | Eddie Bauer, Limited, NBX, XLS, XLS Sport, XLT, XLT Sport | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS
View related parts
Ford Throttle Cable
Part Number: 1S4Z-9A758-EA
Product Specifications
- Other Name: Cable Assembly - Control
- Manufacturer Note: SPI
Fits the following Ford Models:
- Focus | 2000-2004 | LX, SE | 4 Cyl 2.0 L GAS
View related parts
Ford Throttle Cable
Part Number: 1S4Z-9A758-PA
Product Specifications
- Other Name: Cable Assembly - Control
- Manufacturer Note: DOHC
- Replaces: YS4Z-9A758-PA
Fits the following Ford Models:
- Focus | 2000-2003 | SE, Sony Limited Edition, ZTS, ZTW, ZX3, ZX5 | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
Ford Throttle Cable
Part Number: 3F2Z-9A758-AA
Product Specifications
- Other Name: Cable Assembly - Throttle Control
Fits the following Ford Models:
- Freestar | 2004-2007 | Base, Limited, S, SE, SEL, SES | 6 Cyl 3.9 L GAS, 6 Cyl 4.2 L GAS
View related parts
Ford Throttle Cable
Part Number: 3S4Z-9A758-AA
Product Specifications
- Other Name: Cable Assembly - Control
- Manufacturer Note: PZEV
Fits the following Ford Models:
- Focus | 2005-2007 | ST, ZX4 ST | 4 Cyl 2.3 L GAS
View related parts
Ford Throttle Cable
Part Number: 6L3Z-9A758-A
Product Specifications
- Other Name: Cable Assembly - Throttle Control
- Replaces: 1L3Z-9A758-AA
Fits the following Ford Models:
- F-150 | 2001-2003 | XL, XLT | 6 Cyl 4.2 L GAS
- F-150 Heritage | 2004 | XL, XLT | 6 Cyl 4.2 L GAS
View related parts
Ford Throttle Cable
Part Number: 6S4Z-9A758-AA
Product Specifications
- Other Name: Cable Assembly - Control
- Replaces: 4S4Z-9A758-AA
Fits the following Ford Models:
- Focus | 2005-2007 | S, SE, SES, ZX3, ZX4, ZX5, ZXW | 4 Cyl 2.0 L GAS
View related parts
Ford Throttle Cable
Part Number: F1TZ-9A758-F
Product Specifications
- Other Name: Cable Assembly - Throttle Control
Fits the following Ford Models:
- Explorer | 1992-1994 | Eddie Bauer, Limited, Sport, XL, XLT | 6 Cyl 4.0 L GAS
- Ranger | 1992-1994 | Custom, S, Splash, Sport, STX, XL, XLT | 6 Cyl 4.0 L GAS
View related parts
Ford Throttle Cable
Part Number: F4TZ-9A758-L
Product Specifications
- Other Name: Cable Assembly - Throttle Control
Fits the following Ford Models:
- Bronco | 1992-1996 | Custom, Eddie Bauer, XL, XLT, XLT Lariat, XLT Nite, XLT Sport | 8 Cyl 5.0 L GAS, 8 Cyl 5.8 L GAS
- F-150 | 1992-1996 | Custom, Eddie Bauer, Special, XL, XLT, XLT Lariat | 8 Cyl 5.0 L GAS, 8 Cyl 5.8 L GAS
- F-250 | 1992-1996 | Custom, Eddie Bauer, Special, XL, XLT, XLT Lariat | 8 Cyl 5.0 L GAS, 8 Cyl 5.8 L GAS
- F-350 | 1992 | Custom, XL, XLT Lariat | 8 Cyl 5.8 L GAS
View More
View related parts
Ford Throttle Cable
Part Number: F6DZ9A758B
Product Specifications
- Other Name: Cable Assembly - Throttle Control
Fits the following Ford Models:
- Taurus | 1996-1998 | LX, SE Comfort | 6 Cyl 3.0 L GAS
View related parts
Ford Throttle Cable
Part Number: F75Z-9A758-FC
Product Specifications
- Other Name: Cable Assembly - Throttle Control
Fits the following Ford Models:
- Expedition | 1997-1998 | Eddie Bauer, XLT | 8 Cyl 5.4 L GAS
- F-150 | 1997-1998 | Base, Lariat, XL, XLT | 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
- F-250 | 1997-1998 | Base | 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
View More
View related parts
Ford Throttle Cable
Part Number: XF2Z-9A758-MA
Product Specifications
- Other Name: Cable Assembly - Throttle; Cable Assembly - Throttle Control
- Manufacturer Note: BEFORE 8/24/99
Fits the following Ford Models:
- Windstar | 1999 | Base, LX, SE, SEL | 6 Cyl 3.8 L GAS
View related parts
Ford Throttle Cable
Part Number: XL1Z-9A758-EA
Product Specifications
- Other Name: Cable Assembly - Throttle; Cable Assembly - Throttle Control
Fits the following Ford Models:
- Expedition | 1999-2001 | Eddie Bauer, XLT | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
Ford Throttle Cable
Part Number: 2L5Z-9A758-CA
Product Specifications
- Other Name: Cable Assembly - Throttle Control; Cruise Control Cable; Cable Assembly
- Replaces: 1L2Z-9A758-GA
Fits the following Ford Models:
- Explorer | 2001 | Eddie Bauer, Limited, Postal, XL Fleet, XLS, XLT | 6 Cyl 4.0 L GAS
- Explorer Sport | 2001-2003 | Base, XLS, XLT | 6 Cyl 4.0 L GAS
- Explorer Sport Trac | 2001-2005 | Adrenalin, Base, XL, XLS, XLT | 6 Cyl 4.0 L GAS
- Ranger | 2001-2011 | Edge, FX4, Sport, STX, Tremor, XL, XLT | 6 Cyl 4.0 L GAS
View More
View related parts
Ford Throttle Cable
Part Number: F57Z-9A758-A
Product Specifications
- Other Name: Cable Assembly - Throttle; Cable Assembly - Throttle Control
Fits the following Ford Models:
- Ranger | 1995-1997 | Splash, Sport, STX, XL, XL Sport, XLT | 4 Cyl 2.3 L GAS
View related parts
Ford Throttle Cable
Part Number: F77Z-9A758-GB
Product Specifications
- Other Name: Cable Assembly - Throttle
Fits the following Ford Models:
- Explorer | 1997 | Eddie Bauer, Limited, Sport, XL, XLT | 6 Cyl 4.0 L GAS

| Page 1 of 4 |Next >

1-20 of 68 Results

Ford Accelerator Cable Parts Questions & Experts Answers

Throttle Cable
F87Z-9A758-AA
Q: How to Service and Repair the Accelerator Cable on Ford Ranger?
A: The service process for the accelerator pedal cable starts with the removal of screws from the accelerator control splash shield. The following step involves separating the accelerator cable from its position on the throttle lever. Depress the tabs for cable detachment from the accelerator cable bracket while keeping in mind that the process works equally for both 3.0L and 2.5L engines. The following step involves removing the accelerator cable from the accelerator pedal and shaft by using the depress clips method. Follow the opposite sequence of removal steps to install the components.
Throttle Cable
F8ZZ-9A758-AA
Q: How to Service and Repair the Accelerator Cable on Ford Mustang?
A: Service and repair of the accelerator pedal cable requires starting with pushing the nylon bushing out from the accelerator pedal and shaft arm combination. The first step includes unbolting the accelerator cable at the dash panel before extracting the cable. Remove the accelerator cable from its throttle body connection by compressing the locking tabs. At the same time, remove the cable from the bracket. Pulling the cable through the bracket completes the cable removal. Reversing all steps of removal will complete the installation.
Throttle Cable
YL2Z-9A758-AB
Q: How to Service and Repair the Accelerator Cable on Ford Explorer?
A: Service and repair of the accelerator pedal cable requires first removing the bolt and the accelerator control splash shield. The first step involves removing the throttle body connection of the accelerator cable before separating cable section B from section A of the speed control actuator. The next step involves disconnecting the accelerator cable both from the accelerator pedal along with the shaft. Put the accelerator cable through the dash panel opening by collapsing clippings found at the dash panel. In order to install the component follow the steps in reverse order from removal.