2004 Ford Explorer Sport Trac Airbag, Clock Spring, Air Bag Control Module

Air Bag Control Module, Airbag, Clock Spring Installation and Repair Tips for 2004 Ford Explorer Sport Trac

• Q: What checklist should be completed after diagnosing or repairing any Airbag system concern to ensure proper reconnection on 2004 Ford Explorer Sport Trac?

  A: After diagnosing or repairing any air bag system concern, complete the following checklist: confirm all diagnostic tools are removed, in-seat harness connectors are connected, air bag modules are connected, safety belt pretensioner connectors are connected, the restraints control module (RCM) is connected, all sensors are connected, and the battery is connected.
• Q: How is the Clock Spring Serviced and Repaired in an Air Bag Supplemental Restraint System (SRS) on 2004 Ford Explorer Sport Trac?

  A: Wear safety glasses and take care of the air bag module when replacing the Clock Spring assembly. Turn off the system, take out required parts and unplug electrical connections. To install, be sure that all components are properly positioned and that all components, including driver air bag module are firmly attached after which the system should be repowered.
• Q: How to Service and Repair the Air Bag Control Module on 2004 Ford Explorer Sport Trac?

  A: To service the restraints control module (RCM), make sure that the ignition is OFF and that it is kept in its naturally fitting position, so it is not accidentally deployed. Check post-collision damages, wear eye protection and do not practice memory savers. Turn off the SRS, unscrew connections and place RCM back in, tighten and connect properly and repower.