2005 Ford Explorer Sport Trac Airbag, Clock Spring, Air Bag Control Module

Air Bag Control Module, Airbag, Clock Spring Installation and Repair Tips for 2005 Ford Explorer Sport Trac

• Q: How to Arm and Disarm an Airbag System on 2005 Ford Explorer Sport Trac?

  A: To disable the air bag system, switch ignition off to on and make sure that all components of SRS are in place. The light of the air bag indicator is supposed to last six seconds. Unless it lights, or flashes there is an SRS fault, and this is signified by five sets of five beeps.
• Q: What Precautions and Steps Are Involved in Servicing the Clock Spring Assembly on 2005 Ford Explorer Sport Trac?

  A: Wear safety glasses when working with Clock Spring assembly, be careful with air bag modules. Switched the system off, take out the driver air bag module and make sure the wheels are straight. Take off and replace the Clock Spring, one should be sure it is centered well. Once everything is secured reassemble components and repower the system.
• Q: How to Service and Repair the Air Bag Control Module on 2005 Ford Explorer Sport Trac?

  A: Replacement of the restraints control module (RCM) should be done with the ignition off and do not allow it to fall down out of force. Check for post-collision damage, wear eyewear and use of memory savers. Disconnect, Depower the SRS, and change connectors by removing and adding the RCM and repower the SRS.