2005 Ford Mustang Airbag, Clock Spring, Air Bag Control Module

Air Bag Control Module, Airbag, Clock Spring Installation and Repair Tips for 2005 Ford Mustang

• Q: What precautions should be taken when servicing a side Airbag module on 2005 Ford Mustang?

  A: Safety glasses should always be worn when servicing any side air bag module. When deploying the module, hold the air bag side out of your body and wash your hands. Reject broken covers and make the SRS functional before handing back the car. Removal and installation should be done following correct removal and installation procedures and damage should be checked.
• Q: What Precautions and Steps Are Involved in Servicing the Clock Spring Assembly on 2005 Ford Mustang?

  A: Wear safety glasses; avoid memory savers. Airbag lamp when RCM fuse removed with ignition ON is normal. Depower, remove airbag and wheel, tape rotor if reusing, disconnect and remove Clock Spring, recenter until ribbon and arrows align, reinstall, reassemble, repower, verify SRS OK; replace part or reinstall original and retry.
• Q: What precautions should be taken when servicing the air bag control module and ensuring proper operation of the restraints control module (RCM) on 2005 Ford Mustang?

  A: Wear safety glasses when servicing the air bag control module. RCM orientation is crucial. If a collision damaged the center tunnel, inspect mounting and bracket; replace if deformed. Avoid memory savers; modules are static-sensitive. Ensure correct RCM to prevent DTCs. Depower, remove panels, disconnect connectors, replace RCM, reconnect and repower.