2006 Mercury Mariner Airbag, Clock Spring, Air Bag Control Module

Air Bag Control Module, Airbag, Clock Spring Installation and Repair Tips for 2006 Mercury Mariner

• Q: What Precautions and Steps Are Involved in Servicing the Clock Spring Assembly on 2006 Mercury Mariner?

  A: Wear safety glasses and do not use memory savers when servicing the Clock Spring assembly. When RCM fuse is pulled off, the air bag warning lamp is normal. Make sure that SRS is working when giving back the car. Proper removal, centering and re-installation of the Clock Spring and steering parts are to be followed.
• Q: What precautions should be taken when servicing the air bag control module and ensuring the proper operation of the restraints control module (RCM) on 2006 Mercury Mariner?

  A: Safety glasses must always be used when repairing the air bag control module so that no injury is inflicted. Check restraints control module (RCM) following a collision. Install and orient the RCM properly, without damaging it in a static condition. The SRS should be in a faultless condition prior to vehicle giving back. Properly remove and install RCM.
• Q: What precautions should be taken when servicing a side Airbag module on 2006 Mercury Mariner?

  A: Wear safety glasses and service side air bag module with the air bag upside down. Wash hands after deployment to get rid of residue. SRS Before servicing, depower. Repair faulty modules and make certain that the SRS is working and ready the vehicle before handing it back. Use the right procedures in removing and installing.