2007 Ford Mustang Airbag, Clock Spring, Air Bag Control Module

Air Bag Control Module, Airbag, Clock Spring Installation and Repair Tips for 2007 Ford Mustang

• Q: What precautions should be taken when servicing the air bag control module and ensuring the proper installation of the restraints control module (RCM) on 2007 Ford Mustang?

  A: Wear safety glasses when servicing the air bag control module. RCM orientation is crucial. After a collision inspect and replace deformed RCM mounting/bracket. Avoid memory savers; modules are static-sensitive. Install the correct RCM (warning lamp may illuminate when fuse removed). Depower, remove panels, disconnect connectors, swap RCM, reconnect panels, repower.
• Q: What precautions should be taken when servicing the side Airbag module on 2007 Ford Mustang?

  A: Use wear safety glasses and treat it with care when servicing side air bag module. Wash hands because of sodium hydroxide, post-deployment. Change broken modules and coverings. This is to be done by depowering the SRS prior to servicing and then ensuring it is started up again. Installation guidelines should be taken into consideration and foreign objects should be checked prior to being reassembled.
• Q: What Precautions and Steps Are Involved in Installing a Clock Spring Assembly on 2007 Ford Mustang?

  A: When servicing Clock Spring, wear safety glasses and avoid memory savers. Airbag lamp may illuminate when RCM fuse is removed with ignition ON-normal. Depower, center wheels, tilt-lock steering, remove airbag, wheel and shrouds. Tape rotor if reusing; disconnect and remove Clock Spring, recenter if needed, reinstall and repower.