OEM 2000 Ford E-150 Econoline A/C Accumulator

2000 Ford E-150 Econoline A/C Accumulator Parts Questions & Experts Answers

• Q: Is a New A/C Accumulator Necessary for HVAC System Repairs on 2000 Ford E-150 Econoline?

  A: The first step for fixing or servicing the HVAC accumulator requires executing the Refrigerant Discharging and Recovery Procedure. You need to replace the suction accumulator/drier with a new one only when system contamination results from failed A/C compressor or damaged suction accumulator/drier. The first step involves removing the battery tray along with the battery through screw disassembly. Apply a wrench on each side of the evaporator discharge line fitting to prevent damage as you disconnect it. Move to the second step where you should begin by unscrewing the screw from the compressor suction line then proceed to disconnect it with wrenches on each fitting side. The technician must disconnect the A/C cycling switch electrical connector followed by unscrewing the suction accumulator/drier from its mount. The process also involves removal of the A/C cycling switch. When installing the new suction accumulator/drier you must use the correct amount of PAG compressor oil YN-12c F7AZ-19589-DA or equivalent which fulfills Ford specification WSH-M1C231-B. Before sealing the A/C cycling switch and suction accumulator/drier with screws always lubricate the new O-ring seals using PAG compressor oil. The installation requires attaching the A/C cycling switch electrical connector and the evaporator discharge line with PAG compressor oil used to lubricate new O-ring seals while applying a wrench to each fitting side. Install the screw by using a wrench on both sides of the fitting after you connect and lubricate the new O-ring seals of the suction line. Reinstall the battery tray together with the battery while completing an evacuation and charge process for the A/C system.