FordParts
My Garage
My Account
Cart
OEM 2001 Ford E-150 Econoline A/C Accumulator
Accumulator- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 A/C Accumulators found
2001 Ford E-150 Econoline Dehydrator Part Number: 5C2Z-19C836-AB
$104.83 MSRP: $176.00You Save: $71.17 (41%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Accumulator Assembly - Air Conditioning; Drier Desiccant Element; A/C Receiver Drier; A/C Accumulator; Drier; Accumulator
- Manufacturer Note: Less Pressure Switch
- Replaces: YF-3118, 5C2Z-19C836-AA
- Base No.: 19C836
- Item Weight: 7.00 Pounds
- Item Dimensions: 9.1 x 13.9 x 22.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5C2Z-19C836-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2001 Ford E-150 Econoline Dehydrator Part Number: 2C2Z-19C836-BB
Product Specifications- Other Name: Accumulator Assembly - Air Conditioning; Drier Desiccant Element; A/C Receiver Drier; A/C Accumulator; Accumulator; Drier
- Replaces: 2C2Z-19C836-BA, YF-2832
- Base No.: 19C836
- Item Weight: 5.20 Pounds
- Item Dimensions: 8.5 x 14.2 x 17.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2C2Z-19C836-BB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2001 Ford E-150 Econoline A/C Accumulator
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2001 Ford E-150 Econoline A/C Accumulator available at FordPartsDeal.com. You can confidently purchase our OEM 2001 Ford E-150 Econoline A/C Accumulator as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2001 Ford E-150 Econoline A/C Accumulator Parts Q&A
- Q: How to Service the A/C Accumulator for HVAC and Auxiliary Climate Control on 2001 Ford E-150 Econoline?A: Servicing the accumulator HVAC and auxiliary climate control system requires the discharge and recovery of refrigerant as the first procedure. The first step requires battery removal along with battery tray extraction through screw unfastening. A wrench should be used to disconnect the evaporator discharge line on opposite sides of its fitting to protect the A/C connection point after which you should disconnect the auxiliary evaporator to compressor tube spring lock coupling. Disconnect and remove the A/C cycling switch connector then remove the suction accumulator/drier by unscrewing its screws after you remove the screw. The process also requires the removal of the A/C cycling switch. Installation of the new suction accumulator/drier requires proper service with PAG Refrigerant Compressor Oil (R-134a Systems) F7AZ-19589-DA (Motorcraft YN-12-C) or equivalent WSH-M1C213-B-rated oil. The service includes applying the same oil to new O-ring seals before screwing in the A/C cycling switch and suction accumulator/drier. You must reconnect the A/C cycling switch connector and the evaporator discharge line while applying PAG Refrigerant Compressor Oil (R-134a Systems) F7AZ-19589-DA (Motorcraft YN-12-C) or an equivalent Ford specification WSH-M1C231-B. The A/C system needs evacuation and charge as the final step.