FordParts
My Garage
My Account
Cart
OEM 2000 Ford E-150 Econoline Water Pump
H2O Pump- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Water Pumps found
2000 Ford E-150 Econoline Water Pump Part Number: 3L3Z-8501-CA
$49.93 MSRP: $80.55You Save: $30.62 (39%)Ships in 1 Business DayProduct Specifications- Other Name: Pump Assembly - Water; Engine Water Pump; Water Pump Assembly
- Manufacturer Note: With M30 Hub
- Replaced by: 5L3Z-8501-AC
- Replaces: 5R3Z-8501-A, 5L2Z-8501-A, 1L2Z-8501-BB, F7UZ-8501-CA, F8AZ-8501-AA, PW-470, PW-387, YW7Z-8501-AA, AR3Z-8501-A, F4AZ-8501-A, AL3Z-8501-B, PW-499, YR3Z-8501-AB, YC2Z-8501-BA, PW-466, XC2Z-8501-BA
- Base No.: 8501
- Item Weight: 5.60 Pounds
- Item Dimensions: 6.6 x 5.6 x 5.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3L3Z-8501-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2000 Ford E-150 Econoline Water Pump Part Number: 5L3Z-8501-A
$86.30 MSRP: $142.00You Save: $55.70 (40%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Pump Assembly - Water; Engine Water Pump
- Replaces: 3L3Z-8501-DB
- Base No.: 8501
- Item Weight: 3.60 Pounds
- Item Dimensions: 7.9 x 8.4 x 12.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5L3Z-8501-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2000 Ford E-150 Econoline Water Pump
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2000 Ford E-150 Econoline Water Pump available at FordPartsDeal.com. You can confidently purchase our OEM 2000 Ford E-150 Econoline Water Pump as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2000 Ford E-150 Econoline Water Pump Parts Q&A
- Q: How to service and repair the water pump on 2000 Ford E-150 Econoline?A: The first step to work on the water pump involves draining the cooling system fluid. Start by removing the fan with its clutch and then proceed with removing the accessory drive belt. Detach both the lower radiator hose from the water pump and disconnect engine harnesses that attach to the water pump stud and water bypass tube. Moving to the next task involves disconnecting the A/C support bracket by unfastening the nuts followed by bolt elimination and bolt deformation until the bracket can clear away from the work area. First detach all water pump bolts and pulley and afterwards remove the bypass tube and the screw inside. Detaching (A) bolts and (B) stud bolts on (C) water pump enables removal of the water pump from (D) front cover. Clean the gasket surfaces prior to installation by performing the reverse steps of removal.