How to service and repair the exhaust manifold on 2000 Ford Expedition?

When servicing or repairing the exhaust manifold start by lifting and suspending the vehicle. A 4x4 owner should peel back both front wheel opening molding and front fender splash shield. Begin by detaching the nut that supports both the brake booster vacuum hose bracket. The first step includes disconnecting both the EGR valve to exhaust manifold tube connections with the EGR bake pressure transducer hoses and both upper and lower fittings of the EGR valve to exhaust manifold tube before tube removal. When replacing the 5.4L engine exhaust manifold the technician must remove its nuts and exhaust manifold before discarding the used gasket. Before adding the exhaust manifold you should thoroughly inspect the part. Build the exhaust manifold gasket over the exhaust manifold while attaching nuts with loose torque. The appropriate sequence of nut-tightening leads to the installment of the three-way catalytic converter to exhaust manifold nuts. During 4.6L engine installation connect the EGR valve to the exhaust manifold tube upper fitting by first using hand-tightening followed by a torque of 40 Nm (30 ft. lbs.). To mount the exhaust manifold gasket and exhaust manifold on the 5.4L engine properly tighten the nuts to 40 - 60 Nm (30 - 44 ft. lbs.). The brake booster vacuum hose bracket needs installation with its nut followed by reinstallation of front fender splash shield and front wheel opening molding for 4x4 vehicles then lower the vehicle.

OEM 2000 Ford Expedition Exhaust Manifold

Engine Exhaust Manifold

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Exhaust Manifolds found

View related parts
2000 Ford Expedition Exhaust Manifold, Passenger Side
Part Number: XL3Z-9430-GA
$69.50 MSRP: $101.17
You Save: $31.67 (32%)
ADD TO CART
Product Specifications
- Other Name: Manifold Assembly - Exhaust; Exhaust Manifold, Right; Manifold
- Position: Passenger Side
- Base No.: 9430
- Item Weight: 13.90 Pounds
- Item Dimensions: 9.1 x 7.9 x 21.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XL3Z-9430-GA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford Expedition Submodels:
- Eddie Bauer, XLT | 8 Cyl 5.4 L GAS
View related parts
2000 Ford Expedition Exhaust Manifold, Driver Side
Part Number: 2L1Z-9431-CA
Product Specifications
- Other Name: Manifold Assembly - Exhaust; Exhaust Manifold, Left; Manifold
- Manufacturer Note: LH. Includes EGR fitting XL3E-9F485-AA, With EGR valve
- Position: Driver Side
- Replaces: XL3Z-9431-FA
- Base No.: 9430B
- Item Weight: 13.30 Pounds
- Item Dimensions: 9.2 x 7.1 x 19.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2L1Z-9431-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford Expedition Submodels:
- Eddie Bauer, NBX, XLT, XLT Sport | 8 Cyl 5.4 L GAS
View related parts
2000 Ford Expedition Exhaust Manifold, Passenger Side
Part Number: XL3Z-9430-CA
Product Specifications
- Other Name: Manifold Assembly - Exhaust; Exhaust Manifold, Right; Manifold
- Position: Passenger Side
- Base No.: 9430
- Item Weight: 12.30 Pounds
- Item Dimensions: 6.4 x 5.5 x 18.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XL3Z-9430-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford Expedition Submodels:
- Eddie Bauer, XLT | 8 Cyl 4.6 L GAS
View related parts
2000 Ford Expedition Exhaust Manifold, Driver Side
Part Number: XL3Z-9431-BA
Product Specifications
- Other Name: Manifold Assembly - Exhaust; Exhaust Manifold, Left; Manifold
- Manufacturer Note: LH - Includes F65Z-9F485-AA connector.
- Position: Driver Side
- Base No.: 9431
- Item Weight: 12.80 Pounds
- Item Dimensions: 7.2 x 6.1 x 18.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XL3Z-9431-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford Expedition Submodels:
- Eddie Bauer, XLT | 8 Cyl 4.6 L GAS
View related parts
2000 Ford Expedition Exhaust Manifold, Driver Side
Part Number: XL1Z-9431-BA
Product Specifications
- Other Name: Manifold Assembly - Exhaust; Manifold
- Manufacturer Note: LH - Includes XL3Z-9F485-AA, DOHC
- Position: Driver Side
- Base No.: 9430B
- Item Weight: 13.50 Pounds
- Item Dimensions: 21.1 x 8.9 x 5.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XL1Z-9431-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford Expedition Submodels:
- Eddie Bauer, XLT | 8 Cyl 5.4 L GAS

2000 Ford Expedition Exhaust Manifold

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2000 Ford Expedition Exhaust Manifold available at FordPartsDeal.com. You can confidently purchase our OEM 2000 Ford Expedition Exhaust Manifold as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2000 Ford Expedition Exhaust Manifold Parts Questions & Experts Answers

Q: How to service and repair the exhaust manifold on 2000 Ford Expedition?
A: When servicing or repairing the exhaust manifold start by lifting and suspending the vehicle. A 4x4 owner should peel back both front wheel opening molding and front fender splash shield. Begin by detaching the nut that supports both the brake booster vacuum hose bracket. The first step includes disconnecting both the EGR valve to exhaust manifold tube connections with the EGR bake pressure transducer hoses and both upper and lower fittings of the EGR valve to exhaust manifold tube before tube removal. When replacing the 5.4L engine exhaust manifold the technician must remove its nuts and exhaust manifold before discarding the used gasket. Before adding the exhaust manifold you should thoroughly inspect the part. Build the exhaust manifold gasket over the exhaust manifold while attaching nuts with loose torque. The appropriate sequence of nut-tightening leads to the installment of the three-way catalytic converter to exhaust manifold nuts. During 4.6L engine installation connect the EGR valve to the exhaust manifold tube upper fitting by first using hand-tightening followed by a torque of 40 Nm (30 ft. lbs.). To mount the exhaust manifold gasket and exhaust manifold on the 5.4L engine properly tighten the nuts to 40 - 60 Nm (30 - 44 ft. lbs.). The brake booster vacuum hose bracket needs installation with its nut followed by reinstallation of front fender splash shield and front wheel opening molding for 4x4 vehicles then lower the vehicle.