How to Service and Repair the Motor and Transmission Mount on 2000 Ford Expedition?

The transmission mount service and repair process starts with disconnecting the battery ground cable and hoisting the vehicle before proceeding. Proper reinstallation of the driveshaft requires marking the yoke on the rear driveshaft as well as the axle flange for balance retention. First remove the driveshaft through step-by-step removal of its four bolts and then remove the drive shaft unit. Begin by using a High-Lift Jack to support the transmission before uninstalling transmission crossmember securing hardware and pulling out the crossmember. Proceed to eliminate the support insulator that connects to the rear section. Place the rear support insulator first before aligning the transmission crossmember and fixing the bolts for installation. Follow up by detaching the High-Lift Jack and install the nuts onto the transmission crossmember bolts. Place back the driveshaft followed by lowering the vehicle then reattach the battery ground cable.

OEM 2000 Ford Expedition Motor And Transmission Mount

Motor and Trans Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

12 Motor And Transmission Mounts found

View related parts
2000 Ford Expedition Transmission Mount Part Number: F85Z-6068-EA
Product Specifications
- Other Name: Insulator Assembly - Engine Support; Manual Transmission Mount; Engine Mount Bracket; Transfer Case Mount; Motor Mount; Rear Mount
- Base No.: 6068
- Item Weight: 3.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F85Z-6068-EA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford Expedition Submodels:
- Eddie Bauer, XLT | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
2000 Ford Expedition Trans Crossmember Part Number: F65Z-6A023-CF
Product Specifications
- Other Name: Support; Transmission Crossmember
- Base No.: 6A023
- Item Weight: 23.50 Pounds
- Item Dimensions: 41.2 x 20.6 x 11.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F65Z-6A023-CF
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford Expedition Submodels:
- Eddie Bauer, XLT | 8 Cyl 4.6 L GAS
View related parts
2000 Ford Expedition Motor Mount, Passenger Side Part Number: XL7Z-6038-AA
Product Specifications
- Other Name: Insulator Assembly; Engine Mount, Right; Engine Mount Bracket; Front Mount
- Position: Passenger Side
- Base No.: 6038
- Item Weight: 4.40 Pounds
- Item Dimensions: 6.1 x 4.6 x 10.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XL7Z-6038-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford Expedition Submodels:
- Eddie Bauer, XLT | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
2000 Ford Expedition Motor Mount, Driver Side Part Number: XL7Z-6038-CA
Product Specifications
- Other Name: Insulator Assembly - Engine Support; Engine Mount, Left, Right; Engine Mount Bracket; Front Mount
- Position: Driver Side
- Replaces: F85Z-6038-BA
- Base No.: 6038
- Item Weight: 4.10 Pounds
- Item Dimensions: 9.2 x 6.1 x 4.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XL7Z-6038-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford Expedition Submodels:
- Eddie Bauer, XLT | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
2000 Ford Expedition Motor Mount, Driver Side Part Number: XL7Z-6038-BA
Product Specifications
- Other Name: Insulator Assembly - Engine; Engine Mount, Left; Engine Mount Bracket; Front Mount; Insulator Assembly - Engine Support
- Position: Driver Side
- Replaces: F85Z-6038-EA
- Base No.: 6038
- Item Weight: 3.90 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XL7Z-6038-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford Expedition Submodels:
- Eddie Bauer, XLT | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
2000 Ford Expedition Transmission Mount Part Number: F85Z-6068-DA
Product Specifications
- Other Name: Insulator Assembly - Engine Support; Automatic Transmission Mount; Engine Mount Bracket; Transfer Case Mount.; Rear Mount
- Manufacturer Note: 4x2
- Base No.: 6068
- Item Weight: 3.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F85Z-6068-DA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford Expedition Submodels:
- Eddie Bauer, XLT | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
2000 Ford Expedition Motor Mount Bracket, Driver Side Part Number: F85Z-6029-CA
Product Specifications
- Other Name: Bracket - Engine Support; Engine Mount Bracket, Left; Motor Mount; Engine Mount Bracket
- Manufacturer Note: LH, (7700)
- Position: Driver Side
- Base No.: 6029
- Item Weight: 1.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F85Z-6029-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford Expedition Submodels:
- Eddie Bauer, XLT | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
2000 Ford Expedition Motor Mount Bracket, Passenger Side Part Number: F85Z-6028-AA
Product Specifications
- Other Name: Bracket; Automatic Transmission Mount Bracket, Right; Engine Mount Bracket, Right; Motor Mount; Engine Mount Bracket
- Manufacturer Note: RH, (7700)
- Position: Passenger Side
- Base No.: 6028
- Item Weight: 2.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F85Z-6028-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford Expedition Submodels:
- Eddie Bauer, XLT | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
2000 Ford Expedition Trans Crossmember Part Number: XL3Z-6A023-BA
Product Specifications
- Other Name: Support; Transmission Crossmember
- Base No.: 6A023
- Item Weight: 18.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XL3Z-6A023-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford Expedition Submodels:
- Eddie Bauer, XLT | 8 Cyl 5.4 L GAS
View related parts
2000 Ford Expedition Trans Crossmember Part Number: XL3Z-6A023-AA
Product Specifications
- Other Name: Support; Transmission Crossmember
- Base No.: 6A023
- Item Weight: 13.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XL3Z-6A023-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford Expedition Submodels:
- Eddie Bauer, XLT | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
2000 Ford Expedition Transmission Mount Part Number: F75Z-6068-LA
Product Specifications
- Other Name: Insulator Assembly - Engine; Manual Transmission Mount; Engine Mount Bracket; Transfer Case Mount; Motor Mount; Rear Mount; Insulator Assembly - Engine Support
- Manufacturer Note: 4x2
- Base No.: 6068
- Item Weight: 0.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F75Z-6068-LA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford Expedition Submodels:
- Eddie Bauer, XLT | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
2000 Ford Expedition Trans Crossmember Part Number: XL3Z-6A023-CA
Product Specifications
- Other Name: Support; Transmission Crossmember
- Base No.: 6A023
- Item Weight: 27.50 Pounds
- Item Dimensions: 54.1 x 12.2 x 12.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XL3Z-6A023-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford Expedition Submodels:
- Eddie Bauer, XLT | 8 Cyl 5.4 L GAS

2000 Ford Expedition Motor And Transmission Mount

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2000 Ford Expedition Motor And Transmission Mount available at FordPartsDeal.com. You can confidently purchase our OEM 2000 Ford Expedition Motor And Transmission Mount as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2000 Ford Expedition Motor And Transmission Mount Parts Q&A

Q: How to Service and Repair the Motor and Transmission Mount on 2000 Ford Expedition?
A: The transmission mount service and repair process starts with disconnecting the battery ground cable and hoisting the vehicle before proceeding. Proper reinstallation of the driveshaft requires marking the yoke on the rear driveshaft as well as the axle flange for balance retention. First remove the driveshaft through step-by-step removal of its four bolts and then remove the drive shaft unit. Begin by using a High-Lift Jack to support the transmission before uninstalling transmission crossmember securing hardware and pulling out the crossmember. Proceed to eliminate the support insulator that connects to the rear section. Place the rear support insulator first before aligning the transmission crossmember and fixing the bolts for installation. Follow up by detaching the High-Lift Jack and install the nuts onto the transmission crossmember bolts. Place back the driveshaft followed by lowering the vehicle then reattach the battery ground cable.