How to Service and Repair the Motor and Transmission Mount on 2001 Ford Expedition?

The first step for transmission mount servicing includes removing the battery ground cable along with vehicle hoisting before proceeding. The initial balance of the driveshaft can be retained by marking the yoke against the axle flange. Then remove the rear driveshaft using its four bolts. The transmission requires support from a high-lift jack before removal of the heat shield bolt and then transmission crossmember and the rear support insulator bolts and nuts. Begin by insertion of the rear support insulator before placing the transmission crossmember in its original position. Begin by installing transmission crossmember bolts before applying nuts to the bolts and then installing the heat shield bolt. First remove the high-lift jack from service and then attach the nuts before reconnecting the driveshaft followed by lowering the vehicle and finishing by reconnecting the battery ground cable.

OEM 2001 Ford Expedition Motor And Transmission Mount

Motor and Trans Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

12 Motor And Transmission Mounts found

View related parts
2001 Ford Expedition Transmission Mount Part Number: F85Z-6068-EA
Product Specifications
- Other Name: Insulator Assembly - Engine Support; Manual Transmission Mount; Engine Mount Bracket; Transfer Case Mount; Motor Mount; Rear Mount
- Base No.: 6068
- Item Weight: 3.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F85Z-6068-EA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Ford Expedition Submodels:
- Eddie Bauer, XLT | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
2001 Ford Expedition Trans Crossmember Part Number: F65Z-6A023-CF
Product Specifications
- Other Name: Support; Transmission Crossmember
- Base No.: 6A023
- Item Weight: 23.50 Pounds
- Item Dimensions: 41.2 x 20.6 x 11.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F65Z-6A023-CF
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Ford Expedition Submodels:
- Eddie Bauer, XLT | 8 Cyl 4.6 L GAS
View related parts
2001 Ford Expedition Motor Mount, Passenger Side Part Number: XL7Z-6038-AA
Product Specifications
- Other Name: Insulator Assembly; Engine Mount, Right; Engine Mount Bracket; Front Mount
- Position: Passenger Side
- Base No.: 6038
- Item Weight: 4.40 Pounds
- Item Dimensions: 6.1 x 4.6 x 10.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XL7Z-6038-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Ford Expedition Submodels:
- Eddie Bauer, XLT | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
2001 Ford Expedition Motor Mount, Driver Side Part Number: XL7Z-6038-CA
Product Specifications
- Other Name: Insulator Assembly - Engine Support; Engine Mount, Left, Right; Engine Mount Bracket; Front Mount
- Position: Driver Side
- Replaces: F85Z-6038-BA
- Base No.: 6038
- Item Weight: 4.10 Pounds
- Item Dimensions: 9.2 x 6.1 x 4.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XL7Z-6038-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Ford Expedition Submodels:
- Eddie Bauer, XLT | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
2001 Ford Expedition Motor Mount, Driver Side Part Number: XL7Z-6038-BA
Product Specifications
- Other Name: Insulator Assembly - Engine; Engine Mount, Left; Engine Mount Bracket; Front Mount; Insulator Assembly - Engine Support
- Position: Driver Side
- Replaces: F85Z-6038-EA
- Base No.: 6038
- Item Weight: 3.90 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XL7Z-6038-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Ford Expedition Submodels:
- Eddie Bauer, XLT | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
2001 Ford Expedition Transmission Mount Part Number: F85Z-6068-DA
Product Specifications
- Other Name: Insulator Assembly - Engine Support; Automatic Transmission Mount; Engine Mount Bracket; Transfer Case Mount.; Rear Mount
- Manufacturer Note: 4x2
- Base No.: 6068
- Item Weight: 3.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F85Z-6068-DA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Ford Expedition Submodels:
- Eddie Bauer, XLT | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
2001 Ford Expedition Motor Mount Bracket, Driver Side Part Number: F85Z-6029-CA
Product Specifications
- Other Name: Bracket - Engine Support; Engine Mount Bracket, Left; Motor Mount; Engine Mount Bracket
- Manufacturer Note: LH, (7700)
- Position: Driver Side
- Base No.: 6029
- Item Weight: 1.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F85Z-6029-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Ford Expedition Submodels:
- Eddie Bauer, XLT | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
2001 Ford Expedition Motor Mount Bracket, Passenger Side Part Number: F85Z-6028-AA
Product Specifications
- Other Name: Bracket; Automatic Transmission Mount Bracket, Right; Engine Mount Bracket, Right; Motor Mount; Engine Mount Bracket
- Manufacturer Note: RH, (7700)
- Position: Passenger Side
- Base No.: 6028
- Item Weight: 2.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F85Z-6028-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Ford Expedition Submodels:
- Eddie Bauer, XLT | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
2001 Ford Expedition Trans Crossmember Part Number: XL3Z-6A023-BA
Product Specifications
- Other Name: Support; Transmission Crossmember
- Base No.: 6A023
- Item Weight: 18.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XL3Z-6A023-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Ford Expedition Submodels:
- Eddie Bauer, XLT | 8 Cyl 5.4 L GAS
View related parts
2001 Ford Expedition Trans Crossmember Part Number: XL3Z-6A023-AA
Product Specifications
- Other Name: Support; Transmission Crossmember
- Base No.: 6A023
- Item Weight: 13.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XL3Z-6A023-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Ford Expedition Submodels:
- Eddie Bauer, XLT | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
2001 Ford Expedition Transmission Mount Part Number: F75Z-6068-LA
Product Specifications
- Other Name: Insulator Assembly - Engine; Manual Transmission Mount; Engine Mount Bracket; Transfer Case Mount; Motor Mount; Rear Mount; Insulator Assembly - Engine Support
- Manufacturer Note: 4x2
- Base No.: 6068
- Item Weight: 0.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F75Z-6068-LA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Ford Expedition Submodels:
- Eddie Bauer, XLT | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
2001 Ford Expedition Trans Crossmember Part Number: XL3Z-6A023-CA
Product Specifications
- Other Name: Support; Transmission Crossmember
- Base No.: 6A023
- Item Weight: 27.50 Pounds
- Item Dimensions: 54.1 x 12.2 x 12.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XL3Z-6A023-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Ford Expedition Submodels:
- Eddie Bauer, XLT | 8 Cyl 5.4 L GAS

2001 Ford Expedition Motor And Transmission Mount

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2001 Ford Expedition Motor And Transmission Mount available at FordPartsDeal.com. You can confidently purchase our OEM 2001 Ford Expedition Motor And Transmission Mount as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2001 Ford Expedition Motor And Transmission Mount Parts Q&A

Q: How to Service and Repair the Motor and Transmission Mount on 2001 Ford Expedition?
A: The first step for transmission mount servicing includes removing the battery ground cable along with vehicle hoisting before proceeding. The initial balance of the driveshaft can be retained by marking the yoke against the axle flange. Then remove the rear driveshaft using its four bolts. The transmission requires support from a high-lift jack before removal of the heat shield bolt and then transmission crossmember and the rear support insulator bolts and nuts. Begin by insertion of the rear support insulator before placing the transmission crossmember in its original position. Begin by installing transmission crossmember bolts before applying nuts to the bolts and then installing the heat shield bolt. First remove the high-lift jack from service and then attach the nuts before reconnecting the driveshaft followed by lowering the vehicle and finishing by reconnecting the battery ground cable.