How to Service and Repair the Rear One-Piece Drive Shaft on 2000 Ford F-250 Super Duty?

The repair process of the rear one-piece drive/propeller shaft starts by properly raising and supporting the vehicle. An index marker should be used to indicate the location between the rear driveshaft and rear axle flange and transfer case flange. The drive disconnect process for the rear axle requires marking and bolting removal of the driveshaft while also removing its U-joint retainers before finally attaching new bolts and retainers. New bolts and retainers should replace those taken off after the third removal. Begin by removing the four bolts pertaining to the rear driveshaft and transfer case and afterward wrap each bearing cup in electrical tape to stop them from separating from the U-joint spider while removing the rear driveshaft. The installation process starts with driving the rear driveshaft apart from the rear axle followed by subtracting the driveshaft from the transfer case. Acceptable rear driveshaft installation occurs when you align the index marks in place. The third removal step requires cleaning bolt threads while applying Loctite(R) 242 or equivalent before executing the installation procedure backward to replace bolts and retainers using new components after completion of the procedure.

OEM 2000 Ford F-250 Super Duty Drive Shaft

Axle Shaft

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

64 Drive Shafts found

View related parts
2000 Ford F-250 Super Duty Drive Shaft Part Number: 5C3Z-4A376-FA
$392.25 MSRP: $567.69
You Save: $175.44 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft
- Base No.: 4A376
- Item Weight: 34.20 Pounds
- Item Dimensions: 6.3 x 6.1 x 56.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5C3Z-4A376-FA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford F-250 Super Duty Submodels:
- Lariat, XL, XLT | 8 Cyl 7.3 L DIESEL
View related parts
2000 Ford F-250 Super Duty Axle Shaft, Front Driver Side Part Number: 4C3Z-3220-BA
$410.76 MSRP: $603.17
You Save: $192.41 (32%)
ADD TO CART
Product Specifications
- Other Name: Shaft - Front Axle; Axle Shaft Assembly; Axle Assembly
- Position: Front Driver Side
- Replaces: 3C3Z-3220-BA
- Item Weight: 34.90 Pounds
- Item Dimensions: 30.7 x 6.2 x 6.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4C3Z-3220-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford F-250 Super Duty Submodels:
- Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL
View related parts
2000 Ford F-250 Super Duty Axle Shaft, Front Passenger Side Part Number: 4C3Z-3219-BA
$454.45 MSRP: $667.33
You Save: $212.88 (32%)
ADD TO CART
Product Specifications
- Other Name: Shaft - Front Axle; Axle Shaft Assembly; Axle Assembly
- Position: Front Passenger Side
- Replaces: 3C3Z-3219-BA
- Item Weight: 35.40 Pounds
- Item Dimensions: 6.2 x 6.2 x 29.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4C3Z-3219-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford F-250 Super Duty Submodels:
- Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL
View related parts
2000 Ford F-250 Super Duty Drive Shaft Part Number: F81Z-4R602-GA
$574.31 MSRP: $778.46
You Save: $204.15 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft
- Item Weight: 61.00 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F81Z-4R602-GA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following 2000 Ford F-250 Super Duty Submodels:
- Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS
View related parts
2000 Ford F-250 Super Duty Drive Shaft Part Number: 5C3Z-4A376-D
$435.84 MSRP: $590.77
You Save: $154.93 (27%)
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft
- Base No.: 4A376
- Item Weight: 38.20 Pounds
- Item Dimensions: 6.1 x 6.3 x 55.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5C3Z-4A376-D
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford F-250 Super Duty Submodels:
- Lariat, XL, XLT | 8 Cyl 7.3 L DIESEL
View related parts
2000 Ford F-250 Super Duty Drive Shaft Part Number: 5C3Z-4A376-A
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft
- Base No.: 4A376
- Item Weight: 35.50 Pounds
- Item Dimensions: 63.0 x 6.3 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5C3Z-4A376-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford F-250 Super Duty Submodels:
- Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS
View related parts
2000 Ford F-250 Super Duty Drive Shaft Part Number: F81Z-4602-AG
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft
- Base No.: 4602
- Item Weight: 24.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F81Z-4602-AG
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford F-250 Super Duty Submodels:
- Lariat, XL, XLT | 8 Cyl 5.4 L GAS
View related parts
2000 Ford F-250 Super Duty Drive Shaft Part Number: F81Z-4R602-LKE
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F81Z-4R602-LKE
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following 2000 Ford F-250 Super Duty Submodels:
- Lariat, XL, XLT | 8 Cyl 7.3 L DIESEL
View related parts
2000 Ford F-250 Super Duty Drive Shaft Part Number: 1L3Z-4R602-AA
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft
- Item Dimensions: 9.9 x 13.0 x 55.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1L3Z-4R602-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following 2000 Ford F-250 Super Duty Submodels:
- Lariat, XL, XLT | 8 Cyl 5.4 L GAS
View related parts
2000 Ford F-250 Super Duty Drive Shaft Part Number: 5C3Z-4A376-B
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft
- Base No.: 4A376
- Item Dimensions: 26.4 x 6.0 x 15.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5C3Z-4A376-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford F-250 Super Duty Submodels:
- Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS
View related parts
2000 Ford F-250 Super Duty Drive Shaft Part Number: 5C3Z-4A376-C
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft
- Base No.: 4A376
- Item Dimensions: 25.7 x 6.2 x 15.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5C3Z-4A376-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford F-250 Super Duty Submodels:
- Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS
View related parts
2000 Ford F-250 Super Duty Drive Shaft Part Number: 5C3Z-4R602-H
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft
- Base No.: 4R602
- Item Weight: 31.50 Pounds
- Item Dimensions: 26.2 x 6.0 x 15.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5C3Z-4R602-H
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford F-250 Super Duty Submodels:
- Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS
View related parts
2000 Ford F-250 Super Duty Drive Shaft Part Number: F81Z-4602-ABD
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft
- Base No.: 4602
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F81Z-4602-ABD
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following 2000 Ford F-250 Super Duty Submodels:
- Lariat, XL, XLT | 8 Cyl 7.3 L DIESEL
View related parts
2000 Ford F-250 Super Duty Drive Shaft Part Number: F81Z-4602-ACC
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft
- Base No.: 4602
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F81Z-4602-ACC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following 2000 Ford F-250 Super Duty Submodels:
- Lariat, XL, XLT | 10 Cyl 6.8 L GAS
View related parts
2000 Ford F-250 Super Duty Drive Shaft Part Number: F81Z-4602-AD
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft
- Base No.: 4602
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F81Z-4602-AD
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following 2000 Ford F-250 Super Duty Submodels:
- Lariat, XL, XLT | 8 Cyl 5.4 L GAS
View related parts
2000 Ford F-250 Super Duty Drive Shaft Part Number: F81Z-4602-CTG
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft
- Base No.: 4602
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F81Z-4602-CTG
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following 2000 Ford F-250 Super Duty Submodels:
- Lariat, XL, XLT | 8 Cyl 7.3 L DIESEL
View related parts
2000 Ford F-250 Super Duty Drive Shaft Part Number: F81Z-4602-DB
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft
- Base No.: 4602
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F81Z-4602-DB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following 2000 Ford F-250 Super Duty Submodels:
- Lariat, XL, XLT | 10 Cyl 6.8 L GAS
View related parts
2000 Ford F-250 Super Duty Drive Shaft Part Number: F81Z-4602-DCG
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft
- Base No.: 4602
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F81Z-4602-DCG
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following 2000 Ford F-250 Super Duty Submodels:
- Lariat, XL, XLT | 10 Cyl 6.8 L GAS
View related parts
2000 Ford F-250 Super Duty Drive Shaft Part Number: F81Z-4602-DGG
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft
- Base No.: 4602
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F81Z-4602-DGG
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following 2000 Ford F-250 Super Duty Submodels:
- King Ranch, Lariat, XL, XLT | 8 Cyl 5.4 L GAS
View related parts
2000 Ford F-250 Super Duty Drive Shaft Part Number: F81Z-4602-DLG
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft
- Base No.: 4602
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F81Z-4602-DLG
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following 2000 Ford F-250 Super Duty Submodels:
- King Ranch, Lariat, XL, XLT | 8 Cyl 5.4 L GAS

| Page 1 of 4 |Next >

1-20 of 64 Results

2000 Ford F-250 Super Duty Drive Shaft

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2000 Ford F-250 Super Duty Drive Shaft available at FordPartsDeal.com. You can confidently purchase our OEM 2000 Ford F-250 Super Duty Drive Shaft as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2000 Ford F-250 Super Duty Drive Shaft Parts Q&A

Q: How to Service and Repair the Rear One-Piece Drive Shaft on 2000 Ford F-250 Super Duty?
A: The repair process of the rear one-piece drive/propeller shaft starts by properly raising and supporting the vehicle. An index marker should be used to indicate the location between the rear driveshaft and rear axle flange and transfer case flange. The drive disconnect process for the rear axle requires marking and bolting removal of the driveshaft while also removing its U-joint retainers before finally attaching new bolts and retainers. New bolts and retainers should replace those taken off after the third removal. Begin by removing the four bolts pertaining to the rear driveshaft and transfer case and afterward wrap each bearing cup in electrical tape to stop them from separating from the U-joint spider while removing the rear driveshaft. The installation process starts with driving the rear driveshaft apart from the rear axle followed by subtracting the driveshaft from the transfer case. Acceptable rear driveshaft installation occurs when you align the index marks in place. The third removal step requires cleaning bolt threads while applying Loctite(R) 242 or equivalent before executing the installation procedure backward to replace bolts and retainers using new components after completion of the procedure.