How to remove and replace the side air bag module safely on 2000 Ford Focus?

Safety glasses should always be worn when handling side air bag modules to prevent injuries from potential accidental activation. The connectors on the air bag module need to be avoided because probing could result in a deployment incident with personal injury risk for you. Memory saver devices should never be used because they fail to minimize injury risks. A seat with a seat-mounted side air bag along with a safety belt pretensioner requires you to first depower the supplemental restraint system. There is no SRS fault when the air bag warning lamp illuminates because the RCM fuse has been removed during this test cycle. A complete inspection of the SRS operational readiness and lack of faults must occur before any vehicle return to its customer. The first step entails depowering the system before removing the front seat backrest component. Make note of the wiring harness location since a wrong route could lead to damages from seat movement. Use a tool to disconnect the side air bag module wiring harness from the seat frame through the detaching retaining clip. Pull out the side air bag module after removing its retaining nuts and discard these nuts. A side air bag module always requires left-hand or right-hand orientation depending on the seat choice and wire harnesses should rest against the seat base after installation. Use new self-locking nuts to complete the installation by reverting the uninstallation steps. Finally, repower the system.

OEM 2000 Ford Focus Air Bag

Air Bag Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Air Bags found

View related parts
2000 Ford Focus Driver Air Bag Part Number: YS4Z-54043B13-AAC
$135.55 MSRP: $187.52
You Save: $51.97 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module Assembly - Ecu; Steering Wheel Air Bag
- Manufacturer Note: (,H*) , Medium Parchment (use W713191,S900 to attach 043B13 to 3600) , without speed control
- Base No.: 043B13
- Item Weight: 3.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YS4Z-54043B13-AAC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford Focus Submodels:
- LX, SE, Sony Limited Edition, ZTS, ZX3 | 4 Cyl 2.0 L GAS
View related parts
2000 Ford Focus Driver Inflator Module, Midnight Black Part Number: YS4Z-54043B13-AAB
$126.68 MSRP: $175.25
You Save: $48.57 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module Assembly - Ecu; Steering Wheel Air Bag; Driver Air Bag
- Base No.: 043B13
- Item Weight: 3.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YS4Z-54043B13-AAB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford Focus Submodels:
- LX, SE, Sony Limited Edition, ZTS, ZX3 | 4 Cyl 2.0 L GAS
View related parts
2000 Ford Focus Passenger Air Bag, Black, Upper Part Number: YS4Z-54044A74-BAC
$78.31 MSRP: $108.34
You Save: $30.03 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module - Air Bag; Instrument Panel Air Bag, Upper
- Manufacturer Note: (,W*) , Midnight Black , when replacing strap type retainer by this bracket type, refer to shop manual 501,20B,91 for instructions.
- Position: Upper
- Base No.: 044A74
- Item Weight: 12.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YS4Z-54044A74-BAC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford Focus Submodels:
- LX, SE, Sony Limited Edition, ZTS, ZX3 | 4 Cyl 2.0 L GAS
View related parts
2000 Ford Focus Driver Inflator Module, Midnight Black Part Number: YS4Z-54043B13-ABA
$308.08 MSRP: $426.20
You Save: $118.12 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module Assembly - Ecu; Steering Wheel Air Bag; Driver Air Bag
- Base No.: 043B13
- Item Weight: 3.90 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YS4Z-54043B13-ABA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford Focus Submodels:
- LX, SE, Sony Limited Edition, ZTS, ZX3 | 4 Cyl 2.0 L GAS
View related parts
2000 Ford Focus Driver Air Bag Part Number: YS4Z-54043B13-AAA
$61.61 MSRP: $85.23
You Save: $23.62 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module - Air Bag; Steering Wheel Air Bag
- Manufacturer Note: (,H*) , Medium Parchment (use W713191,S900 to attach 043B13 to 3600) , with speed control
- Base No.: 043B13
- Item Weight: 3.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YS4Z-54043B13-AAA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford Focus Submodels:
- LX, SE, Sony Limited Edition, ZTS, ZX3 | 4 Cyl 2.0 L GAS
View related parts
2000 Ford Focus Side Impact Inflator Module, Front Passenger Side Part Number: YS4Z-54611D10-AB
$167.76 MSRP: $232.08
You Save: $64.32 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Air Bag; Seat Air Bag, Front Right; Side Air Bag
- Manufacturer Note: R.H., except SVT
- Position: Front Passenger Side
- Base No.: 611D10
- Item Weight: 3.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YS4Z-54611D10-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford Focus Submodels:
- LX, SE, Sony Limited Edition, SVT, ZTS, ZTW, ZX3, ZX5 | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
2000 Ford Focus Side Impact Inflator Module, Front Driver Side Part Number: YS4Z-54611D10-AC
Product Specifications
- Other Name: Air Bag; Seat Air Bag, Front Left; Side Air Bag
- Manufacturer Note: L.H., except SVT
- Position: Front Driver Side
- Base No.: 611D10
- Item Weight: 3.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YS4Z-54611D10-AC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford Focus Submodels:
- LX, SE, Sony Limited Edition, SVT, ZTS, ZTW, ZX3, ZX5 | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
2000 Ford Focus Passenger Air Bag, Upper Part Number: YS4Z-54044A74-BAB
Product Specifications
- Other Name: Module Assembly - Ecu; Instrument Panel Air Bag, Upper; Passenger Inflator Module
- Manufacturer Note: (-A*) - Medium Dark Graphite - when replacing strap type retainer by this bracket type, refer to shop manual 501-20B-91 for instructions.
- Position: Upper
- Base No.: 044A74
- Item Weight: 12.70 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YS4Z-54044A74-BAB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford Focus Submodels:
- LX, SE, Sony Limited Edition, ZTS, ZX3 | 4 Cyl 2.0 L GAS
View related parts
2000 Ford Focus Passenger Air Bag, Upper Part Number: YS4Z-54044A74-BAA
Product Specifications
- Other Name: Module - Air Bag; Instrument Panel Air Bag, Upper
- Manufacturer Note: (-H*) - Medium Parchment - when replacing strap type retainer by this bracket type, refer to shop manual 501-20B-91 for instructions.
- Position: Upper
- Base No.: 044A74
- Item Weight: 13.10 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YS4Z-54044A74-BAA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford Focus Submodels:
- LX, SE, Sony Limited Edition, ZTS, ZX3 | 4 Cyl 2.0 L GAS

2000 Ford Focus Air Bag

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2000 Ford Focus Air Bag available at FordPartsDeal.com. You can confidently purchase our OEM 2000 Ford Focus Air Bag as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2000 Ford Focus Air Bag Parts Q&A

Q: How to remove and replace the side air bag module safely on 2000 Ford Focus?
A: Safety glasses should always be worn when handling side air bag modules to prevent injuries from potential accidental activation. The connectors on the air bag module need to be avoided because probing could result in a deployment incident with personal injury risk for you. Memory saver devices should never be used because they fail to minimize injury risks. A seat with a seat-mounted side air bag along with a safety belt pretensioner requires you to first depower the supplemental restraint system. There is no SRS fault when the air bag warning lamp illuminates because the RCM fuse has been removed during this test cycle. A complete inspection of the SRS operational readiness and lack of faults must occur before any vehicle return to its customer. The first step entails depowering the system before removing the front seat backrest component. Make note of the wiring harness location since a wrong route could lead to damages from seat movement. Use a tool to disconnect the side air bag module wiring harness from the seat frame through the detaching retaining clip. Pull out the side air bag module after removing its retaining nuts and discard these nuts. A side air bag module always requires left-hand or right-hand orientation depending on the seat choice and wire harnesses should rest against the seat base after installation. Use new self-locking nuts to complete the installation by reverting the uninstallation steps. Finally, repower the system.