Other Name: Module Assembly - Ecu; Instrument Panel Air Bag, Upper; Passenger Inflator Module
Manufacturer Note: (-A*) - Medium Dark Graphite - when replacing strap type retainer by this bracket type, refer to shop manual 501-20B-91 for instructions.
Position: Upper
Base No.: 044A74
Item Weight: 12.70 Pounds
Condition: New
Fitment Type: Direct Replacement
SKU: YS4Z-54044A74-BAB
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
More Info
Fits the following 2001 Ford Focus Submodels:
LX, SE, Sony Limited Edition, ZTS, ZX3 | 4 Cyl 2.0 L GAS
Other Name: Module - Air Bag; Instrument Panel Air Bag, Upper
Manufacturer Note: (-H*) - Medium Parchment - when replacing strap type retainer by this bracket type, refer to shop manual 501-20B-91 for instructions.
Position: Upper
Base No.: 044A74
Item Weight: 13.10 Pounds
Condition: New
Fitment Type: Direct Replacement
SKU: YS4Z-54044A74-BAA
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
More Info
Fits the following 2001 Ford Focus Submodels:
LX, SE, Sony Limited Edition, ZTS, ZX3 | 4 Cyl 2.0 L GAS
2001 Ford Focus Air Bag
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2001 Ford Focus Air Bag available at FordPartsDeal.com. You can confidently purchase our OEM 2001 Ford Focus Air Bag as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2001 Ford Focus Air Bag Parts Q&A
Q: What precautions should be taken when servicing the side air bag module on 2001 Ford Focus?
A: Safety glasses must be worn during side air bag module servicing to protect against possible injuries from deployment accidents. The air bag module connectors must never be probed since this action could activate the deployment and result in personal injuries. Memory saver devices must not be used to protect from injuries. The supplemental restraint system (SRS) must have its depowering follow-up before starting seat-related repair which includes air bag and pretensioner elements. During operations the RCM fuse removal will trigger the air bag warning lamp to activate while the ignition switch remains ON yet the absence of faults is normal. The vehicle needs to receive back to customers only after technicians confirm that the SRS operates without any defects. Start by following the system depowering protocol then separate the front seat backrest from its main components. Save the wiring harness position by remembering where it sits before moving the seat to maintain its safety. The seat frame needs a trim tool to detach the side air bag module wiring harness while releasing its retaining clip. Remove the side air bag module along with the retaining nuts that need discarding. During installation of the new module technicians should observe two important points: the module has specific left-hand or right-hand orientation and the wiring harness must position toward the seat base. Use new self-locking nuts then follow the reverse steps of disassembly. Finally, repower the system.