How to service the rear bumper cover for both 3-door and 4-door on 2000 Ford Focus?

Service of the rear bumper cover on each 3-door and 4-door version begins with the removal of upper push-pins followed by vehicle elevation and support. The bumper cover comes off by removing the bolt at both fender splash shield locations then unfastening the one nut and one clip at each fender location before and after removing the bolt. The service begins with taking off lower push-pin retainers then lowering the vehicle to a suitable position. The access to the nut for 4-door and 5-door vehicles starts by removing the loadspace trim after which you need to remove the nut situated on both sides. Start by disconnecting the electrical connector before removing the rear lamp cluster through the elimination of its attaching nuts. Take off the bumper cover only after removing two push-pin retainers from both sides and disconnecting the fog lamp electrical connector when present on the vehicle. Installation of the bumper cover requires performing the reverse steps of removal.

OEM 2000 Ford Focus Bumper

Bumper Fascia

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Bumpers found

View related parts
2000 Ford Focus Reinforce Bar, Rear Part Number: 2M5Z-17906-BA
$245.24 MSRP: $339.27
You Save: $94.03 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Rear; Bumper Impact Bar, Rear
- Manufacturer Note: Impact Bar - Steel
- Position: Rear
- Replaces: YS4Z-17906-CA
- Base No.: 17906A
- Item Weight: 15.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2M5Z-17906-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford Focus Submodels:
- SE, SES, ZTW, ZXW | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
2000 Ford Focus Reinforce Bar, Rear Part Number: 2M5Z-17906-CA
$138.39 MSRP: $191.45
You Save: $53.06 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Rear; Bumper Impact Bar, Rear
- Manufacturer Note: Steel
- Position: Rear
- Replaces: YS4Z-17906-EA
- Base No.: 17906
- Item Weight: 13.60 Pounds
- Item Dimensions: 75.6 x 12.5 x 51.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2M5Z-17906-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford Focus Submodels:
- S, SE, SES, SVT, ZX3, ZX5 | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
2000 Ford Focus Reinforce Bar, Rear Part Number: 3S4Z-17906-AA
$117.51 MSRP: $171.05
You Save: $53.54 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bar - Impact; Bumper Impact Bar, Rear
- Manufacturer Note: Impact Bar - Steel
- Position: Rear
- Base No.: 17906
- Item Weight: 21.00 Pounds
- Item Dimensions: 60.4 x 12.6 x 12.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3S4Z-17906-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford Focus Submodels:
- LX, S, SE, SES, Sony Limited Edition, ST, ZTS, ZX4, ZX4 ST | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
2000 Ford Focus Bumper Cover, Front Part Number: 2M5Z-17D957-FAA
Product Specifications
- Other Name: Cover; Bumper Cover, Front
- Position: Front
- Replaces: 2M5Z-17D957-KAB, YS4Z-17D957-FAA
- Base No.: 17D957
- Item Weight: 7.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2M5Z-17D957-FAA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford Focus Submodels:
- LX, SE, Sony Limited Edition, ZTS, ZTW, ZX3, ZX5 | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
2000 Ford Focus Bumper Cover, Rear Part Number: 6S4Z-17K835-HAPTM
Product Specifications
- Other Name: Cover; Bumper Cover, Rear
- Position: Rear
- Replaces: YS4Z-17K835-SAA, 3S4Z-17K835-FAA
- Base No.: 17K835
- Item Weight: 9.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6S4Z-17K835-HAPTM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford Focus Submodels:
- S, SE, SES, ZX3, ZX5 | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
2000 Ford Focus Bumper Cover, Rear Part Number: 6S4Z-17K835-GAPTM
Product Specifications
- Other Name: Cover; Bumper Cover, Rear
- Position: Rear
- Replaces: 3S4Z-17K835-DAA
- Base No.: 17K835
- Item Weight: 13.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6S4Z-17K835-GAPTM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford Focus Submodels:
- SE, SES, ZTW, ZXW | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
2000 Ford Focus Bumper Cover, Rear Part Number: 3S4Z-17K835-EAA
Product Specifications
- Other Name: Cover; Bumper Cover, Rear
- Position: Rear
- Replaces: 2M5Z-17K835-CAA
- Base No.: 17K835
- Item Weight: 14.90 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3S4Z-17K835-EAA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford Focus Submodels:
- LX, SE, Sony Limited Edition, ZTS | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS

2000 Ford Focus Bumper

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2000 Ford Focus Bumper available at FordPartsDeal.com. You can confidently purchase our OEM 2000 Ford Focus Bumper as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2000 Ford Focus Bumper Parts Q&A

Q: How to service the rear bumper cover for both 3-door and 4-door on 2000 Ford Focus?
A: Service of the rear bumper cover on each 3-door and 4-door version begins with the removal of upper push-pins followed by vehicle elevation and support. The bumper cover comes off by removing the bolt at both fender splash shield locations then unfastening the one nut and one clip at each fender location before and after removing the bolt. The service begins with taking off lower push-pin retainers then lowering the vehicle to a suitable position. The access to the nut for 4-door and 5-door vehicles starts by removing the loadspace trim after which you need to remove the nut situated on both sides. Start by disconnecting the electrical connector before removing the rear lamp cluster through the elimination of its attaching nuts. Take off the bumper cover only after removing two push-pin retainers from both sides and disconnecting the fog lamp electrical connector when present on the vehicle. Installation of the bumper cover requires performing the reverse steps of removal.