How to service the front Power Window Motor and Window Regulator on 2000 Ford Focus?

Start servicing the front door window motor and regulator by taking out the door trim panel together with the side impact bolster as well as the door speaker if present. You should disconnect the speaker electrical connector while detaching the door latch release handle and utilize a plastic knife to cut through the Butyl strip on the watershield being cautious to avoid damaging the adhesive by touching it. Connect the electrical connector from the window operating switch before removing the window one-touch down relay. The procedure to remove window glass retaining bolts begins with their alignment through access holes followed by glass detachment from the regulator when holding it at the top of the opening and lowering the regulator. Place suitable hooks under the window glass for elevation before using them to maintain stable support. Disconnect the motor electrical connector as well as the window operating switch electrical connector from their respective clips. The procedure concludes with regulator and motor removal by unthreading the screws. Reinstall the component by performing the opposite steps used for removal.

OEM 2000 Ford Focus Power Window Motor

Window Lift Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Power Window Motors found

View related parts
2000 Ford Focus Window Motor, Rear Passenger Side
Part Number: YS4Z-5423394-GA
$47.98 MSRP: $65.30
You Save: $17.32 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor Assembly - Window Operator; Power Window Motor, Rear Right; Motor Assembly - Window Operating; Power Window Motor
- Manufacturer Note: R.H., rear door
- Position: Rear Passenger Side
- Base No.: 14553
- Item Weight: 1.70 Pounds
- Item Dimensions: 8.2 x 3.0 x 6.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YS4Z-5423394-GA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford Focus Submodels:
- LX, S, SE, SES, Sony Limited Edition, ST, SVT, ZTS, ZTW, ZX3, ZX4, ZX4 ST, ZX5, ZXW | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
2000 Ford Focus Window Motor, Rear Driver Side
Part Number: YS4Z-5423395-GB
$38.70 MSRP: $53.54
You Save: $14.84 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor Assembly - Window Operator; Power Window Motor, Rear Left, Rear Right; Motor Assembly - Window Operating; Power Window Motor
- Manufacturer Note: L.H., rear door
- Position: Rear Driver Side
- Base No.: 14553
- Item Weight: 1.70 Pounds
- Item Dimensions: 8.2 x 5.9 x 3.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YS4Z-5423395-GB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford Focus Submodels:
- LX, S, SE, SES, Sony Limited Edition, ST, SVT, ZTS, ZTW, ZX3, ZX4, ZX4 ST, ZX5, ZXW | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
2000 Ford Focus Window Motor, Front Passenger Side
Part Number: YS4Z-6123394-CA
$91.02 MSRP: $140.07
You Save: $49.05 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor Assembly - Window Operating; Power Window Motor, Front Right, Rear Right; Power Window Motor
- Manufacturer Note: R.H., front door
- Position: Front Passenger Side
- Base No.: 23394
- Item Weight: 1.80 Pounds
- Item Dimensions: 6.1 x 2.9 x 10.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YS4Z-6123394-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford Focus Submodels:
- LX, SE, Sony Limited Edition, SVT, ZTS, ZTW, ZX3, ZX5 | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
2000 Ford Focus Window Motor, Rear Driver Side
Part Number: YS4Z-6123395-CB
$76.33 MSRP: $125.60
You Save: $49.27 (40%)
ADD TO CART
Product Specifications
- Other Name: Motor Assembly - Window Operating; Power Window Motor, Front Left, Rear Left; Power Window Motor
- Manufacturer Note: L.H., Front door
- Position: Rear Driver Side
- Base No.: 23395
- Item Weight: 1.80 Pounds
- Item Dimensions: 3.9 x 4.3 x 9.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YS4Z-6123395-CB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford Focus Submodels:
- LX, SE, Sony Limited Edition, SVT, ZTS, ZTW, ZX3, ZX5 | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS

2000 Ford Focus Power Window Motor

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2000 Ford Focus Power Window Motor available at FordPartsDeal.com. You can confidently purchase our OEM 2000 Ford Focus Power Window Motor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2000 Ford Focus Power Window Motor Parts Questions & Experts Answers

Q: How to service the front Power Window Motor and Window Regulator on 2000 Ford Focus?
A: Start servicing the front door window motor and regulator by taking out the door trim panel together with the side impact bolster as well as the door speaker if present. You should disconnect the speaker electrical connector while detaching the door latch release handle and utilize a plastic knife to cut through the Butyl strip on the watershield being cautious to avoid damaging the adhesive by touching it. Connect the electrical connector from the window operating switch before removing the window one-touch down relay. The procedure to remove window glass retaining bolts begins with their alignment through access holes followed by glass detachment from the regulator when holding it at the top of the opening and lowering the regulator. Place suitable hooks under the window glass for elevation before using them to maintain stable support. Disconnect the motor electrical connector as well as the window operating switch electrical connector from their respective clips. The procedure concludes with regulator and motor removal by unthreading the screws. Reinstall the component by performing the opposite steps used for removal.