OEM 2000 Ford Focus Washer Pump

2000 Ford Focus Washer Pump Parts Q&A

• Q: How to service and repair the windshield washer pump on 2000 Ford Focus?

  A: Repairing the windshield washer pump begins with removing the washer reservoir that requires undoing and raising the air filter housing followed by removing the bolt then pulling out the filler neck. First raise the vehicle so you can proceed to take out six bolts from the wheelhouse trim panel. The washer reservoir requires two bolt screws removal and plug disconnect before you can remove the three attached hoses. Separate the connector while disconnecting hoses then lift out the pump together with the rubber gasket. Start by extracting the headlamp wash pump together with its rubber seal by separating the connector then disconnecting hoses before lifting out the pump. Install the additional cap on the rear vent tube of the reservoir before verifying that both front and rear ventilation tubes are in their proper positions. The procedure for washer system water leakage from a filled windscreen washer reservoir during strong acceleration or deceleration must be followed when concerns exist. The installation process should start from the opposite direction and requires reservoir washer filling before placing the filler neck correctly with Vaseline application. The final step includes testing both windscreen washing and headlamp washing functions.