How to service and repair the front shock absorber on 2000 Ford Mustang?

Start repairing or servicing a front shock absorber by hoisting the vehicle and taking off both wheel along with the tire. Starting with the front brake disc removal you must also detach the bolt from the ABS sensor before unclipping the wire from its bracket and removing the nut and bracket. Start by positioning a jack stand under front suspension lower arm (3078) since you need to remove shock absorber (18124) from spindle (3105) by unbolting and disposing both nuts and bolts. Lower the front suspension lower arm carefully before taking out the jack stand yet maintain the vehicle weight from resting on the front brake disc shield so no damage occurs. Lower the vehicle to reach the upper mount nuts and bolt before removing the shock absorber by discarding the nuts and pulling out the shock absorber itself. Place the shock absorber inside a vise while taking off first the nut then the front shock absorber mounting bracket (18183) and finally the sleeve and the bushing. Follow the same removal sequence while installing the parts with proper torque values followed by using new parts with equivalent part numbers to protect the suspension system integrity.

OEM 2000 Ford Mustang Shock Absorber

Suspension Shock Absorber

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Shock Absorbers found

View related parts
2000 Ford Mustang Strut, Front Part Number: 5U2Z-18V124-ZM
Product Specifications
- Other Name: Kit - Front Suspension Strut; Suspension Strut, Front
- Position: Front
- Replaces: 3R3Z-18124-BA, BU2Z-18V124-M, AS-2009-G, 1U2Z-18124-FA, 1U2Z-18124-EA, ASTV-26, AST-43, ASH-24460, YR3Z-18124-AA, XR3Z-18124-AB, 5U2Z-18V124-ZN
- Base No.: 18124
- Item Weight: 11.60 Pounds
- Item Dimensions: 23.7 x 6.1 x 7.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 5U2Z-18V124-ZM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford Mustang Submodels:
- Base, GT, GT Bullitt, GTS, Mach 1, SVT Cobra, SVT Cobra 10th Anniversary | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L GAS
View related parts
2000 Ford Mustang Shock Absorber, Rear Part Number: 5U2Z-18V125-VJ
Product Specifications
- Other Name: Kit - Shock Absorber; Suspension Shock Absorber, Rear; Shock; Suspension Shock Absorber
- Position: Rear
- Replaces: F4ZZ-18125-B, YR3Z-18125-BA, F8AZ-18125-KA
- Base No.: 18125
- Item Weight: 4.00 Pounds
- Item Dimensions: 27.6 x 3.7 x 4.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 5U2Z-18V125-VJ
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford Mustang Submodels:
- Base, GT, GT Bullitt, GTS, SVT Cobra | 6 Cyl 3.8 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L GAS
View related parts
2000 Ford Mustang Strut, Front Part Number: BU2Z-18V124-N
Product Specifications
- Other Name: Shock Absorber Assembly - Front; Suspension Strut, Front; Suspension Strut Assembly
- Position: Front
- Replaces: YR3Z-18124-BA, 3R3Z-18124-CA, AST-44
- Base No.: 18124
- Item Weight: 10.70 Pounds
- Item Dimensions: 26.0 x 4.2 x 4.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: BU2Z-18V124-N
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford Mustang Submodels:
- GT, GT Bullitt, Mach 1, SVT Cobra, SVT Cobra 10th Anniversary | 8 Cyl 4.6 L GAS
View related parts
2000 Ford Mustang Shock Absorber, Rear Part Number: XR3Z-18125-CA
Product Specifications
- Other Name: Kit - Shock Absorber; Suspension Shock Absorber, Rear; Shock; Suspension Shock Absorber
- Manufacturer Note: RH & LH, Purple, Cobra
- Position: Rear
- Base No.: 18125
- Item Weight: 0.80 Pounds
- Item Dimensions: 3.9 x 2.3 x 2.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: XR3Z-18125-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford Mustang Submodels:
- Base, GT, GT Bullitt, SVT Cobra | 6 Cyl 3.8 L GAS, 8 Cyl 4.6 L GAS

2000 Ford Mustang Shock Absorber

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2000 Ford Mustang Shock Absorber available at FordPartsDeal.com. You can confidently purchase our OEM 2000 Ford Mustang Shock Absorber as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2000 Ford Mustang Shock Absorber Parts Q&A

Q: How to service and repair the front shock absorber on 2000 Ford Mustang?
A: Start repairing or servicing a front shock absorber by hoisting the vehicle and taking off both wheel along with the tire. Starting with the front brake disc removal you must also detach the bolt from the ABS sensor before unclipping the wire from its bracket and removing the nut and bracket. Start by positioning a jack stand under front suspension lower arm (3078) since you need to remove shock absorber (18124) from spindle (3105) by unbolting and disposing both nuts and bolts. Lower the front suspension lower arm carefully before taking out the jack stand yet maintain the vehicle weight from resting on the front brake disc shield so no damage occurs. Lower the vehicle to reach the upper mount nuts and bolt before removing the shock absorber by discarding the nuts and pulling out the shock absorber itself. Place the shock absorber inside a vise while taking off first the nut then the front shock absorber mounting bracket (18183) and finally the sleeve and the bushing. Follow the same removal sequence while installing the parts with proper torque values followed by using new parts with equivalent part numbers to protect the suspension system integrity.