How to bleed the brake caliper on 2000 Ford Ranger?

The procedure for bleeding a brake caliper starts with inserting a box end wrench onto the disc brake caliper bleeder screw followed by attaching a rubber drain tube which should be submerged into clean brake fluid contained within a partially filled container. After pumping the brake pedal an assistant should keep firm pressure on the pedal during the process. The disc brake caliper bleeder screw must be loosened until brake fluid starts to flow followed by screw tightening while the assistant continues pressing the brake pedal. Continue the operation until you receive pure brake fluid without bubbles then follow up with reservoir refilling if required. The disc brake caliper bleeder screw should receive a proper final tightening.

OEM 2000 Ford Ranger Brake Caliper

Caliper

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Brake Calipers found

View related parts
2000 Ford Ranger Caliper, Front Driver Side
Part Number: XL2Z2B121AB
Product Specifications
- Other Name: Caliper Assembly - Brake Lever; Disc Brake Caliper, Front Left; Brake Caliper Repair Kit; Brake Caliper
- Position: Front Driver Side
- Item Weight: 9.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XL2Z2B121AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford Ranger Submodels:
- Edge, XL, XLT | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
2000 Ford Ranger Caliper, Front Passenger Side
Part Number: XL2Z-2B120-AB
Product Specifications
- Other Name: Caliper Assembly - Brake; Disc Brake Caliper, Front Right; Brake Caliper Repair Kit; Brake Caliper
- Manufacturer Note: Housing asy. - RH - 1999/ - w/o pads
- Position: Front Passenger Side
- Base No.: 2B120
- Item Weight: 8.80 Pounds
- Item Dimensions: 6.0 x 6.8 x 9.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XL2Z-2B120-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2000 Ford Ranger Submodels:
- Edge, XL, XLT | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS

2000 Ford Ranger Brake Caliper

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2000 Ford Ranger Brake Caliper available at FordPartsDeal.com. You can confidently purchase our OEM 2000 Ford Ranger Brake Caliper as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2000 Ford Ranger Brake Caliper Parts Questions & Experts Answers

Q: How to bleed the brake caliper on 2000 Ford Ranger?
A: The procedure for bleeding a brake caliper starts with inserting a box end wrench onto the disc brake caliper bleeder screw followed by attaching a rubber drain tube which should be submerged into clean brake fluid contained within a partially filled container. After pumping the brake pedal an assistant should keep firm pressure on the pedal during the process. The disc brake caliper bleeder screw must be loosened until brake fluid starts to flow followed by screw tightening while the assistant continues pressing the brake pedal. Continue the operation until you receive pure brake fluid without bubbles then follow up with reservoir refilling if required. The disc brake caliper bleeder screw should receive a proper final tightening.