FordParts
My Garage
My Account
Cart
OEM 2000 Lincoln Continental Vapor Canister
Fuel Vapor Canister- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 Vapor Canister found
2000 Lincoln Continental Vapor Canister Part Number: F6DZ-9D653-BA
$163.54 MSRP: $269.09You Save: $105.55 (40%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Reservoir Assembly; Vapor Canister Purge Solenoid
- Base No.: 9D653
- Item Weight: 3.70 Pounds
- Item Dimensions: 3.7 x 12.3 x 11.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F6DZ-9D653-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2000 Lincoln Continental Vapor Canister
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2000 Lincoln Continental Vapor Canister available at FordPartsDeal.com. You can confidently purchase our OEM 2000 Lincoln Continental Vapor Canister as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2000 Lincoln Continental Vapor Canister Parts Q&A
- Q: How to Service and Repair the Vapor Canister on 2000 Lincoln Continental?A: The first step for service and repair of the evaporative emission control canister is to lift and support the vehicle. Start by removing the anti-vibration clip which leads to disconnecting both the evaporative canister tube and the Evap canister purge outlet tube from the evaporative emission tubes. Service of the evaporative emissions canister starts by removing the vehicle's bolts, nuts and bracket assembly before disconnection of the solenoid and its connector and hose. Unscrew the canister vent solenoid followed by its elbow and take out the evaporative emission tube while making sure to check and replace the O-ring if needed through a twisting and pulling motion. The last step of the installation involves detaching the evaporative emissions canisters from the evaporative emission canister bracket. Installation of the evaporative emissions canister assembly must involve leak-testing the assembly before its placement. Use Merpol(R) O-ring Seal Lubricant following Ford specification ESE-M99B144-B or an alternative product for lubricating the O-ring seals. The installation process calls for reversing the removal steps while performing a leak test after completion. The running loss monitor verification cycle related to evaporative emissions must be executed following repair.