Other Name: Bulb; Center High Mount Stop Light Bulb; Back Up Light Bulb; License Plate Light Bulb; Turn Signal Light Bulb; Signal Lamp Bulb; various types for exterior and interior lighting.
Position: Rear Outer
Replaces: E9JY-13466-A, F4ZZ-13466-A
Base No.: 13466
Item Weight: 0.30 Pounds
Item Dimensions: 0.4 x 0.4 x 1.0 inches
Condition: New
Fitment Type: Direct Replacement
SKU: E5RY-13466-B
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
More Info
Fits the following 2000 Lincoln LS Submodels:
Appearance, Base, LSE, Luxury, Premium, Sport, Ultimate | 6 Cyl 3.0 L GAS, 8 Cyl 3.9 L GAS
Other Name: Bulb, Turn Signal & Parking, Tail, Backup, License Plate, Side Marker, Headlight; Backup Lamp Bulb; Signal, Parking, Stop, High Mount, Cornering, License, and Parking Light Bulbs.
Position: Lower Outer
Replaces: F8DZ-13466-AB, E8AZ-13466-A
Base No.: 13466
Item Weight: 0.40 Pounds
Item Dimensions: 0.4 x 0.4 x 1.0 inches
Condition: New
Fitment Type: Direct Replacement
SKU: F5DZ-13466-B
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
More Info
Fits the following 2000 Lincoln LS Submodels:
Base, LSE | 6 Cyl 3.0 L GAS, 8 Cyl 3.9 L GAS
2000 Lincoln LS Headlight Bulb
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2000 Lincoln LS Headlight Bulb available at FordPartsDeal.com. You can confidently purchase our OEM 2000 Lincoln LS Headlight Bulb as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2000 Lincoln LS Headlight Bulb Parts Q&A
Q: How to service the headlight bulb on 2000 Lincoln LS?
A: The service process for the headlamp bulb begins by removing the radiator upper sight shield through the removal of pin-type retainers. Discharge the halogen bulb with care since the pressured gas inside can make it explode upon enven minor contact with glass; always grip the bulb base and keep away from touching the glass. A bulb replacement should be handled quickly before removal because extended pre-installation time enables contaminants to affect system performance by settling on both the lens and reflector inside the assembly. The owner should never activate the headlamps without an installed bulb. Beginning the procedure starts with disconnecting the wiring connector followed by pulling the bulb out. You should remove both high and low beam headlamp bulbs through the same process. The installation process should undo the steps used for removal.