Other Name: Bulb; Center High Mount Stop Light Bulb; Back Up Light Bulb; License Plate Light Bulb; Turn Signal Light Bulb; Signal Lamp Bulb; various types for exterior and interior lighting.
Position: Rear Outer
Replaces: E9JY-13466-A, F4ZZ-13466-A
Base No.: 13466
Item Weight: 0.30 Pounds
Item Dimensions: 0.4 x 0.4 x 1.0 inches
Condition: New
Fitment Type: Direct Replacement
SKU: E5RY-13466-B
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
More Info
Fits the following 2001 Lincoln LS Submodels:
Appearance, Base, LSE, Luxury, Premium, Sport, Ultimate | 6 Cyl 3.0 L GAS, 8 Cyl 3.9 L GAS
Other Name: Bulb, Turn Signal & Parking, Tail, Backup, License Plate, Side Marker, Headlight; Backup Lamp Bulb; Signal, Parking, Stop, High Mount, Cornering, License, and Parking Light Bulbs.
Position: Lower Outer
Replaces: F8DZ-13466-AB, E8AZ-13466-A
Base No.: 13466
Item Weight: 0.40 Pounds
Item Dimensions: 0.4 x 0.4 x 1.0 inches
Condition: New
Fitment Type: Direct Replacement
SKU: F5DZ-13466-B
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
More Info
Fits the following 2001 Lincoln LS Submodels:
Base, LSE | 6 Cyl 3.0 L GAS, 8 Cyl 3.9 L GAS
2001 Lincoln LS Headlight Bulb
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2001 Lincoln LS Headlight Bulb available at FordPartsDeal.com. You can confidently purchase our OEM 2001 Lincoln LS Headlight Bulb as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2001 Lincoln LS Headlight Bulb Parts Q&A
Q: How to service the headlight bulb on 2001 Lincoln LS?
A: Service the headlamp bulb by eliminating the radiator upper sight shield through removing the pin-type retainers. Handle bulb bases only and keep away from touching its envelope because pressure gas in the halogen bulb can cause shattering when the glass shows signs of damage or when the bulb receives an impact. The headlamp assembly should keep the bulb in place up to the point where you need to replace it to avoid decreased performance caused by environmental contaminants entering the assembly. Commence only when both the headlamp switch and ignition switch are positioned in the OFF state. The electrical connector should be disconnected before removing the headlamp bulb while maintaining a note that the high and low beam bulbs need removal through similar steps. To mount the part follow the opposite steps from the uninstallation process.