FordParts
My Garage
My Account
Cart
OEM 2000 Mercury Cougar Catalytic Converter
Cat. Converter- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
5 Catalytic Converters found
Product Specifications- Other Name: Converter Assembly; Manifold
- Manufacturer Note: RH manifold and front converter asy. Male fitting at the EGR connector - (note: for warranty repairs - check for technical service publications (SSM, TSB) prior to ordering)
- Position: Passenger Side
- Base No.: 5G232
- Item Weight: 10.70 Pounds
- Item Dimensions: 14.7 x 14.3 x 12.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F8RZ-5G232-BC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
- Product Specifications
- Other Name: Catalyst Assembly; Manifold
- Manufacturer Note: LH manifold and front converter asy. - (note: for warranty repairs - check for technical service publictions (SSM, TSB) prior to ordering)
- Position: Driver Side
- Base No.: 5G232
- Item Weight: 10.50 Pounds
- Item Dimensions: 14.6 x 14.1 x 12.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F8RZ-5G232-AC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2000 Mercury Cougar Catalytic Converter Part Number: F8RZ-5E212-CC
Product Specifications- Other Name: Converter Assembly; Converter
- Item Weight: 13.70 Pounds
- Item Dimensions: 14.7 x 14.4 x 12.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F8RZ-5E212-CC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2000 Mercury Cougar Catalytic Converter Part Number: F8RZ-5E212-BH
Product Specifications- Other Name: Pipe Assembly; Exhaust Pipe; Front Pipe; Converter & Pipe
- Manufacturer Note: Converter asy
- Item Weight: 17.00 Pounds
- Item Dimensions: 14.3 x 14.8 x 12.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F8RZ-5E212-BH
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2000 Mercury Cougar Catalytic Converter Part Number: F8RZ-5E212-BC
Product Specifications- Other Name: Converter Assembly; Converter
- Item Weight: 14.20 Pounds
- Item Dimensions: 14.3 x 14.3 x 12.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F8RZ-5E212-BC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2000 Mercury Cougar Catalytic Converter
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2000 Mercury Cougar Catalytic Converter available at FordPartsDeal.com. You can confidently purchase our OEM 2000 Mercury Cougar Catalytic Converter as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2000 Mercury Cougar Catalytic Converter Parts Q&A
- Q: How to service and repair the catalytic converter on 2000 Mercury Cougar?A: The first step to repair the three-way catalytic converter (TWC) is to remove its heat shield followed by disconnecting TWC from the manifold. Take the necessary measures to lift and stabilize the vehicle before unclipping the heated oxygen sensor electrical wiring connector. The service begins with separating the hanger insulator from the flange connection. Proceed to remove both the flexible pipe assembly along with the TWC by first untightening the nuts followed by nut and bolt removal. Begin with TWC and flexible pipe assembly placement before installing the nut and bolt and finally tightening the bolts. Check the hanger insulators for wear and replace damaged parts then treat all hanger insulators with Myrpol Lubricant D7AZ-I9553-AA or an equivalent solution that adheres to Ford standard ESEM99B 144-B. Apply a new gasket and fasten nuts loosely before securing the flange connection. Lower the vehicle while avoiding the application of jointing compound anywhere ahead of the catalytic converter before tightening the nuts. First raise and support the vehicle before reinstalling the heat shield and following with delivering a snug torque on the nuts and attaching the heated oxygen sensor electrical connector with proper wiring position maintenance.