FordParts
My Garage
My Account
Cart
OEM 2001 Mercury Cougar Catalytic Converter
Cat. Converter- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
6 Catalytic Converters found
2001 Mercury Cougar Catalytic Converter Part Number: F8RZ-5E212-CC
Product Specifications- Other Name: Converter Assembly; Converter
- Item Weight: 13.70 Pounds
- Item Dimensions: 14.7 x 14.4 x 12.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F8RZ-5E212-CC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2001 Mercury Cougar Catalytic Converter Part Number: F8RZ-5E212-BH
Product Specifications- Other Name: Pipe Assembly; Exhaust Pipe; Front Pipe; Converter & Pipe
- Manufacturer Note: Converter asy
- Item Weight: 17.00 Pounds
- Item Dimensions: 14.3 x 14.8 x 12.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F8RZ-5E212-BH
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
- Product Specifications
- Other Name: Converter Assembly
- Manufacturer Note: RH manifold and front converter asy.
- Position: Passenger Side
- Base No.: 5G232
- Item Weight: 10.20 Pounds
- Item Dimensions: 14.8 x 10.8 x 17.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1S8Z-5G232-DB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
- Product Specifications
- Other Name: Converter Assembly
- Manufacturer Note: LH manifold and front converter asy.
- Position: Driver Side
- Base No.: 5G232
- Item Weight: 13.10 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1S8Z-5G232-DA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2001 Mercury Cougar Catalytic Converter Part Number: 1S8Z-5E212-FA
Product Specifications- Other Name: Converter Assembly
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1S8Z-5E212-FA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2001 Mercury Cougar Catalytic Converter Part Number: 1S8Z-5E212-EA
Product Specifications- Other Name: Converter Assembly
- Item Weight: 12.00 Pounds
- Item Dimensions: 14.5 x 10.6 x 17.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1S8Z-5E212-EA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2001 Mercury Cougar Catalytic Converter
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2001 Mercury Cougar Catalytic Converter available at FordPartsDeal.com. You can confidently purchase our OEM 2001 Mercury Cougar Catalytic Converter as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2001 Mercury Cougar Catalytic Converter Parts Q&A
- Q: How to service and repair the catalytic converter on 2001 Mercury Cougar?A: Service operations for the catalytic converter start with removing heat shields then disconnecting the Three Way Catalytic Converter (TWC) from its position on the manifold. After raising the vehicle for support you must disconnect the heated oxygen sensor electrical connector through wire unclipping. The technician should start by disconnecting the flange connection and separating the hanger insulator then proceed to eliminate the TWC and flexible pipe assembly by untightening nuts and removing the nut and bolt. During installation position the TWC and flexible pipe assembly and next install the nut and bolt before tightening the bolts. First check the hanger insulators for wear then replace them when needed and apply Myrpol Lubricant D7AZ-19553-AA or equivalent per Ford specification ESE-M99B144-B. Then install the new gasket and nuts before loosely joining the flange assembly while supporting the vehicle in its lowered position. The usage of jointing compound must end before reaching the catalytic converter area followed by proper tightening of the nuts. Begin by reattaching the heat shield to the exhaust system. Then elevate the vehicle once more before securing the nuts while attaching the heated oxygen sensor electrical cable and securing the wiring in place before letting the vehicle drop to the ground.