FordParts
My Garage
My Account
Cart
OEM 2000 Mercury Mountaineer Water Pump
H2O Pump- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 Water Pumps found
2000 Mercury Mountaineer Water Pump Part Number: 6L2Z-8501-A
$108.18 MSRP: $178.00You Save: $69.82 (40%)Product Specifications- Other Name: Pump Assembly - Water; Engine Water Pump; Water Pump Assembly
- Replaced by: 6L2Z-8501-C
- Base No.: 8501
- Item Weight: 8.10 Pounds
- Item Dimensions: 14.7 x 8.1 x 9.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L2Z-8501-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2000 Mercury Mountaineer Water Pump Part Number: F7TZ-8501-AC
$84.07 MSRP: $135.64You Save: $51.57 (39%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Pump Assembly - Water; Engine Water Pump; Water Pump Assembly
- Replaces: F5TZ-8501-C, F7TZ-8501-AB, PW-349
- Base No.: 8501
- Item Weight: 7.30 Pounds
- Item Dimensions: 14.6 x 7.8 x 9.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F7TZ-8501-AC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2000 Mercury Mountaineer Water Pump Part Number: F87Z-8501-CA
Product Specifications- Other Name: Pump Assembly - Water; Engine Water Pump; Water Pump Assembly
- Base No.: 8501
- Item Weight: 6.60 Pounds
- Item Dimensions: 7.9 x 8.5 x 12.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F87Z-8501-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2000 Mercury Mountaineer Water Pump
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2000 Mercury Mountaineer Water Pump available at FordPartsDeal.com. You can confidently purchase our OEM 2000 Mercury Mountaineer Water Pump as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2000 Mercury Mountaineer Water Pump Parts Q&A
- Q: How to Service and Repair a Water Pump on 2000 Mercury Mountaineer?A: The procedure to service and repair the water pump starts by removing the radiator followed by a lifting of the accessory drive belt tensioner to uninstall the accessory drive belt. First disconnect the belt idler pulley before sliding the water bypass hose clamp backward. First disconnect the heater hose from the water pump through clamp release and hose removal while also disconnecting the lower radiator hose in a similar fashion at the water pump position. Next proceed with taking off both the water pump pulley and then the water pump itself. Prior to new water pump installation use Metal Surface Cleaner F4AZ-1DA536-RA or equivalent WSE-M5B392-A specification from Ford together with a plastic or wooden scraper to prepare the sealing surfaces. You must attach the water bypass hose together with the clamp before installing the water pump pulley. Attach the lower radiator hose to the water pump after hose positioning and then secure it with the clamp while also connecting the heater hose in the same manner. The last installation steps include positioning the belt idler pulley followed by lifting the accessory drive belt tensioner to install the drive belt and replacing the radiator.