How to Service and Repair a Heater Core for Auxiliary Climate Control on 2001 Ford E-150 Econoline?

Before heater core service and repair begins it is vital to check for leaks through a test. Start the repair by removing all third, fourth and fifth bench seats that exist in the vehicle. You should remove the trim panels starting with the left center bolster trim panel and continuing with the quarter trim rear upper panel and ending with the lower rear body side trim panel. Proceed to uncouple the heater core cover through unscrewing it after removing all the preceding components. Disconnect the heater water hoses by using clamps then remove them. You must remove the heater core after disengaging the heater core case seal and pulling out the actual heater core unit. The installation requires following all removal steps backward while applying MERPOL(R) or plain water for lubricating the coolant hoses if needed.

OEM 2001 Ford E-150 Econoline Heater Core

HVAC Heater Core

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Heater Cores found

View related parts
2001 Ford E-150 Econoline Heater Core, Front
Part Number: LC2Z-18478-A
$208.50 MSRP: $306.17
You Save: $97.67 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Heater Assembly; HVAC Heater Core Element; Front Heater Core Case; Rear Heater Core Case.; Case Assembly; Heater Case
- Position: Front
- Replaces: 4C2Z-18476-AA, HC-36, XC2Z-18478-BA
- Condition: New
- Fitment Type: Direct Replacement
- SKU: LC2Z-18478-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Ford E-150 Econoline Submodels:
- Base, XL | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L GAS
View related parts
2001 Ford E-150 Econoline Heater Core, Rear
Part Number: H2MZ-18476-AB
$64.18 MSRP: $107.75
You Save: $43.57 (41%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Heater Assembly - Less Radiator; HVAC Heater Core, Rear; HVAC Heater Core
- Position: Rear
- Replaces: F2UZ-18476-B, HC-10
- Condition: New
- Fitment Type: Direct Replacement
- SKU: H2MZ-18476-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Ford E-150 Econoline Submodels:
- Base, XL | 6 Cyl 4.2 L GAS, 6 Cyl 4.9 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L GAS, 8 Cyl 5.8 L GAS
View related parts
2001 Ford E-150 Econoline Heater Core, Front
Part Number: H2MZ-18476-K
Product Specifications
- Other Name: Heater Assembly - Less Radiator; HVAC Heater Core, Front; HVAC Heater Core
- Position: Front
- Replaces: F7UZ-18476-AA, HC-16
- Item Weight: 3.60 Pounds
- Item Dimensions: 9.8 x 12.8 x 12.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: H2MZ-18476-K
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Ford E-150 Econoline Submodels:
- Base, XL | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L GAS

2001 Ford E-150 Econoline Heater Core

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2001 Ford E-150 Econoline Heater Core available at FordPartsDeal.com. You can confidently purchase our OEM 2001 Ford E-150 Econoline Heater Core as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2001 Ford E-150 Econoline Heater Core Parts Questions & Experts Answers

Q: How to Service and Repair a Heater Core for Auxiliary Climate Control on 2001 Ford E-150 Econoline?
A: Before heater core service and repair begins it is vital to check for leaks through a test. Start the repair by removing all third, fourth and fifth bench seats that exist in the vehicle. You should remove the trim panels starting with the left center bolster trim panel and continuing with the quarter trim rear upper panel and ending with the lower rear body side trim panel. Proceed to uncouple the heater core cover through unscrewing it after removing all the preceding components. Disconnect the heater water hoses by using clamps then remove them. You must remove the heater core after disengaging the heater core case seal and pulling out the actual heater core unit. The installation requires following all removal steps backward while applying MERPOL(R) or plain water for lubricating the coolant hoses if needed.