My Garage
Cart

OEM 2001 Ford E-250 Econoline Blower Motor

A/C Heater Blower Motor
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Blower Motors found

  • 2001 Ford E-250 Econoline Blower Motor Diagram - XC2Z-19805-BA
    View related parts

    2001 Ford E-250 Econoline Blower Motor, Front Part Number: XC2Z-19805-BA

    $62.21 MSRP: $102.36
    You Save: $40.15 (40%)
    ADD TO CART
    Product Specifications
    • Other Name: Motor - Cooling Blower; HVAC Blower Motor, Front; Blower Assembly; Motor Assembly; HVAC Blower Motor
    • Manufacturer Note: Motor - A/C blower, Main unit, Kit includes blower motor, seal & retainer
    • Position: Front
    • Replaces: F8UZ-19805-BA
    • Base No.: 19805
    • Item Weight: 5.50 Pounds
    • Item Dimensions: 9.2 x 8.1 x 10.4 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: XC2Z-19805-BA
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2001 Ford E-250 Econoline Submodels:
    • Base, XL | 6 Cyl 4.2 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
  • 2001 Ford E-250 Econoline Blower Motor - LC2Z-18478-A
    2001 Ford E-250 Econoline Blower Motor Diagram - LC2Z-18478-A
    View related parts

    2001 Ford E-250 Econoline Heater Core, Front Part Number: LC2Z-18478-A

    $196.56 MSRP: $306.17
    You Save: $109.61 (36%)
    Ships in 1-3 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Heater Assembly; HVAC Heater Core Element; Front Heater Core Case; Rear Heater Core Case.; Case Assembly; Heater Case
    • Position: Front
    • Replaces: 4C2Z-18476-AA, HC-36, XC2Z-18478-BA
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: LC2Z-18478-A
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2001 Ford E-250 Econoline Submodels:
    • Base, XL | 6 Cyl 4.2 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
  • 2001 Ford E-250 Econoline Blower Motor Diagram - F4SZ-19805-HA
    View related parts
    Product Specifications
    • Other Name: Motor - Cooling Blower; HVAC Blower Motor; Blower Assembly
    • Manufacturer Note: Kit, includes motor, harness, seal & retainer
    • Base No.: 19805
    • Item Weight: 5.40 Pounds
    • Item Dimensions: 10.2 x 10.4 x 10.5 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: F4SZ-19805-HA
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2001 Ford E-250 Econoline Submodels:
    • Base, XL | 6 Cyl 4.2 L GAS, 6 Cyl 4.9 L BI-FUEL, 6 Cyl 4.9 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS, 8 Cyl 5.8 L GAS

2001 Ford E-250 Econoline Blower Motor

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2001 Ford E-250 Econoline Blower Motor available at FordPartsDeal.com. You can confidently purchase our OEM 2001 Ford E-250 Econoline Blower Motor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2001 Ford E-250 Econoline Blower Motor Parts Q&A

  • Q: How to service and repair the blower motor for auxiliary climate control on 2001 Ford E-250 Econoline?
    A: A technician must start auxiliary climate control blower motor service and repair by taking off the third, fourth, and fifth bench seats when equipped and then removing trim panels consisting of the left center bolster trim panel and the quarter trim rear upper panel along with the lower rear body side trim panel. You should disconnect the electrical connector following removal of the blower motor housing tube and its screws to remove the blower motor. You must first remove the blower motor wheel retaining clip before the wheel itself according to its original position on the blower motor. In order to finish the process you should perform the reverse sequence of removal steps which were used during installation.