How to service and repair the blower motor for auxiliary climate control on Ford E-250 Econoline?

A technician must start auxiliary climate control blower motor service and repair by taking off the third, fourth, and fifth bench seats when equipped and then removing trim panels consisting of the left center bolster trim panel and the quarter trim rear upper panel along with the lower rear body side trim panel. You should disconnect the electrical connector following removal of the blower motor housing tube and its screws to remove the blower motor. You must first remove the blower motor wheel retaining clip before the wheel itself according to its original position on the blower motor. In order to finish the process you should perform the reverse sequence of removal steps which were used during installation.

OEM Ford E-250 Econoline Blower Motor

A/C Heater Blower Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Blower Motors found

View related parts
Ford E-250 Econoline Blower Motor, Front
Part Number: XC2Z-19805-BA
$62.21 MSRP: $102.36
You Save: $40.15 (40%)
ADD TO CART
Product Specifications
- Other Name: Motor - Cooling Blower; HVAC Blower Motor, Front; Blower Assembly; Motor Assembly; HVAC Blower Motor
- Manufacturer Note: Motor - A/C blower, Main unit, Kit includes blower motor, seal & retainer
- Position: Front
- Replaces: F8UZ-19805-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1997-2002 Ford E-250 Econoline | Base, XL | 6 Cyl 4.2 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
View related parts
Ford E-250 Econoline Blower Motor
Part Number: E8UZ19805B
$48.44 MSRP: $65.91
You Save: $17.47 (27%)
ADD TO CART
Product Specifications
- Other Name: Motor Assembly - Air Conditioner Blower
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1991, 1988-1989 Ford E-250 Econoline | Custom, XL | 6 Cyl 4.9 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.8 L GAS
View related parts
Ford E-250 Econoline Heater Core, Front
Part Number: LC2Z-18478-A
$208.50 MSRP: $306.17
You Save: $97.67 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Heater Assembly; HVAC Heater Core Element; Front Heater Core Case; Rear Heater Core Case.; Case Assembly; Heater Case
- Position: Front
- Replaces: 4C2Z-18476-AA, HC-36, XC2Z-18478-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1997-2002 Ford E-250 Econoline | Base, XL | 6 Cyl 4.2 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
View related parts
Ford E-250 Econoline Blower Motor
Part Number: XC4Z-19805-BA
$66.96 MSRP: $110.18
You Save: $43.22 (40%)
ADD TO CART
Product Specifications
- Other Name: Motor - Cooling Blower; HVAC Blower Motor; Blower Assembly
- Manufacturer Note: Main unit- kit includes motor, retainer, & tube
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1992-1996 Ford E-250 Econoline | Base, XL | 6 Cyl 4.9 L BI-FUEL, 6 Cyl 4.9 L GAS, 8 Cyl 5.8 L GAS
View related parts
Ford E-250 Econoline Blower Motor
Part Number: F4SZ-19805-HA
Product Specifications
- Other Name: Motor - Cooling Blower; HVAC Blower Motor; Blower Assembly
- Manufacturer Note: Kit, includes motor, harness, seal & retainer
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1992-2002 Ford E-250 Econoline | Base, XL | 6 Cyl 4.2 L GAS, 6 Cyl 4.9 L BI-FUEL, 6 Cyl 4.9 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS, 8 Cyl 5.8 L GAS
View related parts
Ford E-250 Econoline Blower Motor
Part Number: F2UZ-18527-A
Product Specifications
- Other Name: Motor Assembly; HVAC Blower Motor; Motor
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1988-1991 Ford E-250 Econoline | Custom, XL | 6 Cyl 4.9 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.8 L GAS
View related parts
Ford E-250 Econoline Blower Motor
Part Number: E2TZ-18527-A
Product Specifications
- Other Name: Motor Assembly; HVAC Blower Motor
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1984-1996 Ford E-250 Econoline | Base, Custom, XL | 6 Cyl 4.9 L BI-FUEL, 6 Cyl 4.9 L GAS, 6 Cyl 4.9 L LPG, 8 Cyl 5.0 L GAS, 8 Cyl 5.8 L GAS
View related parts
Ford E-250 Econoline Blower Motor
Part Number: D8UZ19805A
Product Specifications
- Other Name: Motor & Wheel Assembly; Motor - Cooling Blower
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1984-1989 Ford E-250 Econoline | Base, Custom, XL | 6 Cyl 4.9 L GAS, 6 Cyl 4.9 L LPG, 8 Cyl 5.0 L GAS, 8 Cyl 5.8 L GAS

Ford E-250 Econoline Blower Motor

Welcome to our website where you can discover high-quality, genuine Ford E-250 Econoline Blower Motor. We offer an extensive inventory of OEM Ford E-250 Econoline Blower Motor at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.

Ford E-250 Econoline Blower Motor Parts Questions & Experts Answers

Blower Motor, Front
XC2Z-19805-BA
Q: How to service and repair the blower motor for auxiliary climate control on Ford E-250 Econoline?
A: A technician must start auxiliary climate control blower motor service and repair by taking off the third, fourth, and fifth bench seats when equipped and then removing trim panels consisting of the left center bolster trim panel and the quarter trim rear upper panel along with the lower rear body side trim panel. You should disconnect the electrical connector following removal of the blower motor housing tube and its screws to remove the blower motor. You must first remove the blower motor wheel retaining clip before the wheel itself according to its original position on the blower motor. In order to finish the process you should perform the reverse sequence of removal steps which were used during installation.