How to Service and Repair the Brake Backing Plate on 2001 Ford E-250 Econoline?

The first step for servicing or repairing the backing plate requires removal of both the rear brake shoes together with their linings. Begin the repair process by removing the axle shaft and possibly the axle shaft along with the rear hub if both items are needed for removal. Compression of the cable retainer will detach both the parking brake rear cable and conduit from the brake backing plate. Disconnect the brake line fitting first to remove the rear wheel cylinder then remove its two bolts for final removal of the cylinder. You must remove the brake backing plate by taking out its four backing plate-to-axle flange nuts and bolts. Reverse the installation process while making sure to perform brake system bleeding before finishing the work.

OEM 2001 Ford E-250 Econoline Brake Backing Plate

Brake Dust Shield

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Brake Backing Plates found

View related parts
2001 Ford E-250 Econoline Backing Plate, Rear Part Number: YC2Z-2209-EA
Product Specifications
- Other Name: Brake Assembly - Rear; Brake Dust Shield, Rear; Brake Dust Shield
- Manufacturer Note: Brake asy. - includes adapter plate, mtg plate, park brake shoes, springs and hold down hardware - DRW (less cutaway)- 00/03
- Position: Rear
- Base No.: 2209
- Item Weight: 16.70 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YC2Z-2209-EA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Ford E-250 Econoline Submodels:
- Base, XL | 6 Cyl 4.2 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
View related parts
2001 Ford E-250 Econoline Backing Plate, Rear Driver Side Part Number: E4TZ-2212-B
Product Specifications
- Other Name: Plate Assembly - Brake Backing; Brake Backing Plate, Rear Left; Brake Dust Shield
- Position: Rear Driver Side
- Base No.: 2212
- Item Weight: 7.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: E4TZ-2212-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Ford E-250 Econoline Submodels:
- Base, Custom, XL | 6 Cyl 4.2 L GAS, 6 Cyl 4.9 L BI-FUEL, 6 Cyl 4.9 L GAS, 6 Cyl 4.9 L LPG, 8 Cyl 5.0 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS, 8 Cyl 5.8 L GAS
View related parts
2001 Ford E-250 Econoline Backing Plate, Rear Passenger Side Part Number: E4TZ-2211-B
Product Specifications
- Other Name: Plate Assembly - Brake Backing; Brake Backing Plate, Rear Left, Rear Right; Brake Dust Shield
- Position: Rear Passenger Side
- Base No.: 2211
- Item Weight: 7.70 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: E4TZ-2211-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Ford E-250 Econoline Submodels:
- Base, Custom, XL | 6 Cyl 4.2 L GAS, 6 Cyl 4.9 L BI-FUEL, 6 Cyl 4.9 L GAS, 6 Cyl 4.9 L LPG, 8 Cyl 5.0 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS, 8 Cyl 5.8 L GAS

2001 Ford E-250 Econoline Brake Backing Plate

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2001 Ford E-250 Econoline Brake Backing Plate available at FordPartsDeal.com. You can confidently purchase our OEM 2001 Ford E-250 Econoline Brake Backing Plate as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2001 Ford E-250 Econoline Brake Backing Plate Parts Q&A

Q: How to Service and Repair the Brake Backing Plate on 2001 Ford E-250 Econoline?
A: The first step for servicing or repairing the backing plate requires removal of both the rear brake shoes together with their linings. Begin the repair process by removing the axle shaft and possibly the axle shaft along with the rear hub if both items are needed for removal. Compression of the cable retainer will detach both the parking brake rear cable and conduit from the brake backing plate. Disconnect the brake line fitting first to remove the rear wheel cylinder then remove its two bolts for final removal of the cylinder. You must remove the brake backing plate by taking out its four backing plate-to-axle flange nuts and bolts. Reverse the installation process while making sure to perform brake system bleeding before finishing the work.