How to service and repair the brake backing plate on 2002 Ford E-250 Econoline?

Starting the brake backing plate service and repair process requires removing the rear brake shoes together with linings first. The service begins by removing either the axle shaft independent of other parts or both the axle shaft and rear hub. The cable retainer needs compression until the parking brake rear cable and conduit can separate from the brake backing plate. The brake line fitting should be disconnected first while removing the two bolts that secure the rear wheel cylinder before extraction of the rear wheel cylinder itself. If you disconnect first the backing plate from the axle flange using its attached four nuts and bolts you can then freely remove the brake backing plate. To install the components follow the opposite order of removal while performing brake system bleeding as a final step.

OEM 2002 Ford E-250 Econoline Brake Backing Plate

Brake Dust Shield

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Brake Backing Plates found

View related parts
2002 Ford E-250 Econoline Backing Plate, Rear Part Number: YC2Z-2209-EA
Product Specifications
- Other Name: Brake Assembly - Rear; Brake Dust Shield, Rear; Brake Dust Shield
- Manufacturer Note: Brake asy. - includes adapter plate, mtg plate, park brake shoes, springs and hold down hardware - DRW (less cutaway)- 00/03
- Position: Rear
- Base No.: 2209
- Item Weight: 16.70 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YC2Z-2209-EA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Ford E-250 Econoline Submodels:
- Base, XL | 6 Cyl 4.2 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
View related parts
2002 Ford E-250 Econoline Backing Plate, Rear Driver Side Part Number: E4TZ-2212-B
Product Specifications
- Other Name: Plate Assembly - Brake Backing; Brake Backing Plate, Rear Left; Brake Dust Shield
- Position: Rear Driver Side
- Base No.: 2212
- Item Weight: 7.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: E4TZ-2212-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Ford E-250 Econoline Submodels:
- Base, Custom, XL | 6 Cyl 4.2 L GAS, 6 Cyl 4.9 L BI-FUEL, 6 Cyl 4.9 L GAS, 6 Cyl 4.9 L LPG, 8 Cyl 5.0 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS, 8 Cyl 5.8 L GAS
View related parts
2002 Ford E-250 Econoline Backing Plate, Rear Passenger Side Part Number: E4TZ-2211-B
Product Specifications
- Other Name: Plate Assembly - Brake Backing; Brake Backing Plate, Rear Left, Rear Right; Brake Dust Shield
- Position: Rear Passenger Side
- Base No.: 2211
- Item Weight: 7.70 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: E4TZ-2211-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Ford E-250 Econoline Submodels:
- Base, Custom, XL | 6 Cyl 4.2 L GAS, 6 Cyl 4.9 L BI-FUEL, 6 Cyl 4.9 L GAS, 6 Cyl 4.9 L LPG, 8 Cyl 5.0 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS, 8 Cyl 5.8 L GAS

2002 Ford E-250 Econoline Brake Backing Plate

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2002 Ford E-250 Econoline Brake Backing Plate available at FordPartsDeal.com. You can confidently purchase our OEM 2002 Ford E-250 Econoline Brake Backing Plate as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2002 Ford E-250 Econoline Brake Backing Plate Parts Q&A

Q: How to service and repair the brake backing plate on 2002 Ford E-250 Econoline?
A: Starting the brake backing plate service and repair process requires removing the rear brake shoes together with linings first. The service begins by removing either the axle shaft independent of other parts or both the axle shaft and rear hub. The cable retainer needs compression until the parking brake rear cable and conduit can separate from the brake backing plate. The brake line fitting should be disconnected first while removing the two bolts that secure the rear wheel cylinder before extraction of the rear wheel cylinder itself. If you disconnect first the backing plate from the axle flange using its attached four nuts and bolts you can then freely remove the brake backing plate. To install the components follow the opposite order of removal while performing brake system bleeding as a final step.