FordParts
My Garage
My Account
Cart
OEM 2001 Ford Excursion ABS Control Module
Anti Lock Brake Control Module- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
4 ABS Control Modules found
2001 Ford Excursion Control Module Part Number: 5C7Z-2C286-A
Product Specifications- Other Name: Control Assembly - ABS Hydraulics; ABS Control Module; Modulator Valve
- Manufacturer Note: HCU
- Replaces: 1C3Z-2C286-BB
- Base No.: 2C286
- Item Weight: 6.10 Pounds
- Item Dimensions: 10.0 x 7.4 x 5.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5C7Z-2C286-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2001 Ford Excursion Control Valve Part Number: 1C3Z-2C219-BB
Product Specifications- Other Name: Control; ABS Modulator Valve; ABS Control Module; Control Module
- Manufacturer Note: ECU, 4x4, 12/03/2000
- Base No.: 2C219
- Item Weight: 1.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1C3Z-2C219-BB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2001 Ford Excursion Control Valve Part Number: 1C3Z-2C219-AB
Product Specifications- Other Name: Control; ABS Modulator Valve; ABS Control Module; Control Module
- Manufacturer Note: ECU, 4X2, FROM 12/03/00
- Base No.: 2C219
- Item Weight: 1.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1C3Z-2C219-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2001 Ford Excursion Modulator Valve Part Number: 3C3Z-2C286-AARM
Product Specifications- Other Name: Module
- Base No.: 2C286
- Item Weight: 9.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3C3Z-2C286-AARM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2001 Ford Excursion ABS Control Module
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2001 Ford Excursion ABS Control Module available at FordPartsDeal.com. You can confidently purchase our OEM 2001 Ford Excursion ABS Control Module as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2001 Ford Excursion ABS Control Module Parts Q&A
- Q: How to Bleed the Brake System After Replacing the Front ABS Control Module on 2001 Ford Excursion?A: After replacing the 4-Wheel Anti-Lock Brake (4WABS) Hydraulic Control Unit (HCU) or to remove air from the HCU you should start by wiping all dirt from the brake master cylinder filler cap before removing it to add the specified brake fluid into the master cylinder reservoir. Move a clear waste line toward the RH rear bleeder screw then position its other end over a container that holds recommended brake fluid to almost the top. Cycle the brake pedal while opening the RH rear bleeder screw until no air appears in the waste line. To proceed disconnect the waste line after tightening the RH rear bleeder screw. The LH rear bleeder screw should follow the RH front disc brake caliper bleeder screw then the LH front disc brake caliper bleeder screw for this procedure order. Insert the DCL cable adapter from the scan tool into the Data Link Connector spot found under the dash and proceed with the instructions on the tool. The system bleed process should be executed once again as it was performed initially.