OEM 2000 Ford Excursion ABS Control Module

2000 Ford Excursion ABS Control Module Parts Questions & Experts Answers

• Q: How to Service and Repair the Rear ABS Control Module for the Hydraulic Control Assembly on 2000 Ford Excursion?

  A: Workers need to shield the Antilock Control for the rear hydraulic control assembly from static electrical damage since electronic modules demonstrate susceptibility to harm. The procedure for diesel vehicles includes taking out the battery tray but the gas vehicle service requires removing the battery tray ground cable and eliminating the engine air cleaner assembly and EVAP canister. Start by removing the rubber dust cover with pushpin followed by disconnecting the anti-lock brake control module electrical connectors. Brake fluid presents a risk of skin irritation so always wash your hands well after handling this substance. Seek medical help if eye contact with brake fluid occurs because immediate water flushing should precede medical treatment. It is essential to clean up any brake fluid spills from painted or plastic materials by using water for immediate washing. Plug each hydraulic brake line port with material before removing the lines in order to avoid brake fluid spitting. To remove the electronic hydraulic control unit (EHCU) follow the procedure of disassembling the EHCU bracket before removing the EHCU itself. The installation steps should follow removal procedures but users should note that battery connection and disconnection can cause driving abnormalities that need at least 16 km (10 miles) of driving for adaptive learning to complete successfully. The hydraulic control unit (HCU) requires bleeding as the last step.