How to service and repair the coolant reservoir on 2001 Ford Excursion?

The coolant reservoir service and repair process starts with draining to a partial extent from the cooling system. The first step consists of removing both the wing bolt and the lug wrench. First detach the overflow hose by squeezing the clamp followed by the removal of bolts which fasten the degas bottle. Another squeeze on the clamp enables removal of the supply hose and the degas bottle follows afterward.

OEM 2001 Ford Excursion Coolant Reservoir

Coolant Tank Reservoir

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Coolant Reservoir found

View related parts
2001 Ford Excursion Reservoir
Part Number: 2C3Z-8A080-AA
$120.86 MSRP: $149.48
You Save: $28.62 (20%)
ADD TO CART
Product Specifications
- Other Name: Tank Assembly - Radiator Overflow; Engine Coolant Reservoir; Coolant Reservoir
- Replaces: XC3Z-8A080-AA
- Base No.: 8A080
- Item Weight: 5.40 Pounds
- Item Dimensions: 23.1 x 14.6 x 7.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2C3Z-8A080-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Ford Excursion Submodels:
- Eddie Bauer, Limited, XLS, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 7.3 L DIESEL

2001 Ford Excursion Coolant Reservoir

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2001 Ford Excursion Coolant Reservoir available at FordPartsDeal.com. You can confidently purchase our OEM 2001 Ford Excursion Coolant Reservoir as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2001 Ford Excursion Coolant Reservoir Parts Questions & Experts Answers

Q: How to service and repair the coolant reservoir on 2001 Ford Excursion?
A: The coolant reservoir service and repair process starts with draining to a partial extent from the cooling system. The first step consists of removing both the wing bolt and the lug wrench. First detach the overflow hose by squeezing the clamp followed by the removal of bolts which fasten the degas bottle. Another squeeze on the clamp enables removal of the supply hose and the degas bottle follows afterward.