How to service and repair the ignition coil on 2001 Ford Explorer?

Setup service and repair of the ignition coil by starting with battery ground cable disconnect. Start by disconnecting the ignition coil electrical connections through the process of squeezing the locking tabs followed by twisting and upward wire boot removal until six spark plug wires are free and use marks to remember the correct plug locations then twist the remaining wire boots to avoid damage. The service process begins with removing the ignition coil electrical connector followed by igniting coil separation. The installation requires following the opposite steps from removal by applying Silicone Brake Caliper Grease and Dielectric Compound D7AZ-19A331-A (or equivalent that satisfies Ford specification ESE-M1C171-A) inside the spark plug wire coil boots. installation of the radio ignition interference capacitor needs to be completed by inserting it under the correct ignition coil mounting bolt.

OEM 2001 Ford Explorer Ignition Coil

Ignition Coil Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Ignition Coils found

View related parts
2001 Ford Explorer Ignition Coil Part Number: 7U2Z-12029-B
$68.99 MSRP: $115.82
You Save: $46.83 (41%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Coil Assembly - Ignition; Direct Ignition Coil Oe Quality; Distributor Less Coil; Direct Ignition Coil; Coil Assembly; Coil
- Replaces: 7U2Z-12029-A, DG-484, F1VY-12029-A, F37Z-12029-A, F5LY-12029-A, F5OY-12029-A, F5OY-12029-B, E8TZ-12029-A, YS4Z-12029-AA
- Base No.: 12029
- Item Weight: 2.40 Pounds
- Item Dimensions: 5.7 x 4.4 x 5.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7U2Z-12029-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Ford Explorer Submodels:
- Eddie Bauer, Limited, XLS, XLT | 8 Cyl 5.0 L GAS
View related parts
2001 Ford Explorer Ignition Coil Part Number: FOTZ-12029-A
$83.87 MSRP: $138.00
You Save: $54.13 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Coil Assembly - Ignition; Distributor Less Coil; Coil
- Manufacturer Note: OHV, SOHC
- Base No.: 12029
- Item Weight: 4.40 Pounds
- Item Dimensions: 8.2 x 4.5 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: FOTZ-12029-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Ford Explorer Submodels:
- Eddie Bauer, Expedition, Limited, NBX, Postal, Sport, XL, XL Fleet, XLS, XLS Sport, XLT, XLT Sport | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS

2001 Ford Explorer Ignition Coil

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2001 Ford Explorer Ignition Coil available at FordPartsDeal.com. You can confidently purchase our OEM 2001 Ford Explorer Ignition Coil as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2001 Ford Explorer Ignition Coil Parts Q&A

Q: How to service and repair the ignition coil on 2001 Ford Explorer?
A: Setup service and repair of the ignition coil by starting with battery ground cable disconnect. Start by disconnecting the ignition coil electrical connections through the process of squeezing the locking tabs followed by twisting and upward wire boot removal until six spark plug wires are free and use marks to remember the correct plug locations then twist the remaining wire boots to avoid damage. The service process begins with removing the ignition coil electrical connector followed by igniting coil separation. The installation requires following the opposite steps from removal by applying Silicone Brake Caliper Grease and Dielectric Compound D7AZ-19A331-A (or equivalent that satisfies Ford specification ESE-M1C171-A) inside the spark plug wire coil boots. installation of the radio ignition interference capacitor needs to be completed by inserting it under the correct ignition coil mounting bolt.