FordParts
My Garage
My Account
Cart
OEM 2001 Ford Mustang Intake Manifold
Engine Intake Manifold- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
6 Intake Manifolds found
2001 Ford Mustang Intake Manifold Part Number: 1W7Z-9424-AB
$358.18 MSRP: $446.67You Save: $88.49 (20%)Product Specifications- Other Name: Manifold Assembly - Inlet
- Manufacturer Note: One Piece Design
- Replaced by: PU7Z-9424-A
- Base No.: 9424
- Item Weight: 17.00 Pounds
- Item Dimensions: 21.0 x 18.4 x 12.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1W7Z-9424-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2001 Ford Mustang Intake Manifold, Upper Part Number: 2R3Z-9424-EB
Product Specifications- Other Name: Manifold Assembly - Inlet
- Position: Upper
- Replaces: 2R3Z-9424-EA
- Base No.: 9424A
- Item Weight: 17.00 Pounds
- Item Dimensions: 16.3 x 17.1 x 14.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2R3Z-9424-EB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2001 Ford Mustang Intake Manifold, Lower Part Number: YR3Z-9424-BA
Product Specifications- Other Name: Manifold Assembly - Inlet
- Position: Lower
- Base No.: 9424
- Item Weight: 9.10 Pounds
- Item Dimensions: 15.8 x 16.7 x 14.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YR3Z-9424-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2001 Ford Mustang Intake Manifold, Upper Part Number: XR3Z-9424-AA
Product Specifications- Other Name: Manifold Assembly - Inlet
- Position: Upper
- Base No.: 9424
- Item Weight: 12.40 Pounds
- Item Dimensions: 16.1 x 17.2 x 14.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XR3Z-9424-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2001 Ford Mustang Intake Manifold Part Number: 2R3Z-9424-AB
Product Specifications- Other Name: Manifold Assembly - Inlet
- Base No.: 9424
- Item Weight: 38.50 Pounds
- Item Dimensions: 16.1 x 17.2 x 14.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2R3Z-9424-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2001 Ford Mustang Intake Manifold, Lower Part Number: 1R3Z-9424-BB
Product Specifications- Other Name: Manifold Assembly - Inlet
- Position: Lower
- Base No.: 9424B
- Item Weight: 19.70 Pounds
- Item Dimensions: 11.8 x 4.1 x 22.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1R3Z-9424-BB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2001 Ford Mustang Intake Manifold
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2001 Ford Mustang Intake Manifold available at FordPartsDeal.com. You can confidently purchase our OEM 2001 Ford Mustang Intake Manifold as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2001 Ford Mustang Intake Manifold Parts Q&A
- Q: How to service and repair the lower intake manifold on 2001 Ford Mustang?A: It is essential to start lower intake manifold maintenance by removing the upper intake manifold and draining part of the cooling system while relieving fuel system pressure. The technician disconnects the vacuum hose then the fuel pressure sensor electrical connector before moving to the fuel injection supply manifold. The Intake Manifold Runner Control (IMRC) actuator electrical connector should be detached while you place the engine wire harness to one side. The technician will begin replacement by disassembling the heater bypass tube from its position and then separating the heater hose followed by disconnection of EGR vacuum tube and the EGR tube and coolant hoses and upper radiator hose as well as water bypass hose. Detach the fuel injection supply manifold with fuel injectors in one assembly after disconnecting the electrical connector while making a note regarding short and long bolt positions. An assembly of lower intake manifold will require eight short bolts and six long bolts extraction before it can be discarded together with its intake manifold gaskets. Website readers should apply silicone gasket and sealant to front and rear end seal mounting points before installing lower intake manifold front and rear end seals and intake manifold gaskets inside a four-minute time frame after sealant application. The lower intake manifold must receive silicone gasket and sealant at specific locations before torqueing the bolts to 5 Nm (44 inch lbs.) followed by 10 Nm (89 inch lbs.) in a stepwise procedure. The fuel injection supply manifold and fuel injectors should be installed along with reattachment of electrical connectors and coolant hoses and EGR tube and EGR vacuum tube. Apply water to the O-ring before installing the heater hose along with heater bypass tube while connecting the IMRC actuator electrical connector and arranging the engine wire harness by installing pin-type retainers. The last steps include connecting the fuel injection supply manifold with the fuel pressure electrical connector and vacuum hose after installing the upper intake manifold and performing the correct bleeding procedure for cooling system maintenance.