How to service the exhaust manifold on 2001 Ford Ranger?

Start the exhaust manifold service by disconnecting both the battery ground cable together with the Intake Air Temperature (IAT) sensor. Begin by removing the air cleaner outlet tube then loosing the two nuts to create space for the transducer. Try to loosen the EGR valve connection at the exhaust manifold before separating it from the EGR valve and follow by disconnecting the three-way catalytic converter from its exhaust manifold position. The service requires front engine lifting eye removal with its supporting nuts before proceeding to discard the eye. Two studs and six bolts need to be uninstalled from the exhaust manifold before removal while you should discard the exhaust manifold gasket. Before mounting the gasket surfaces on the cylinder head and exhaust manifold you must clean them before applying a new exhaust manifold gasket. To reinstall the component follow all steps in reverse order while torquing the six bolts first to 20 - 23 Nm (15 - 16 ft. lbs.) followed by torquing the two studs to 60 - 80 Nm (45 - 59 ft. lbs.) over two separate stages.

OEM 2001 Ford Ranger Exhaust Manifold

Engine Exhaust Manifold

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Exhaust Manifolds found

View related parts
2001 Ford Ranger Exhaust Manifold, Passenger Side
Part Number: 1L2Z-9430-CB
$277.63 MSRP: $384.08
You Save: $106.45 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Manifold Assembly - Exhaust; Exhaust Manifold, Right; Manifold
- Position: Passenger Side
- Replaces: 1L2Z-9430-CA
- Base No.: 9430
- Item Weight: 14.60 Pounds
- Item Dimensions: 24.6 x 10.2 x 6.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1L2Z-9430-CB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Ford Ranger Submodels:
- Edge, FX4, Sport, STX, Tremor, XL, XLT | 6 Cyl 4.0 L GAS
View related parts
2001 Ford Ranger Exhaust Manifold, Driver Side
Part Number: 1L5Z-9431-AA
$39.05 MSRP: $54.03
You Save: $14.98 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Manifold Assembly - Exhaust; Exhaust Manifold, Left; Manifold
- Manufacturer Note: LH, Unleaded fuel
- Position: Driver Side
- Base No.: 9430A
- Item Weight: 9.80 Pounds
- Item Dimensions: 17.9 x 8.7 x 5.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1L5Z-9431-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Ford Ranger Submodels:
- Edge, Tremor, XL, XLT | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
2001 Ford Ranger Exhaust Manifold, Driver Side
Part Number: 1L2Z-9431-CB
Product Specifications
- Other Name: Manifold Assembly - Exhaust; Exhaust Manifold, Left; Manifold
- Position: Driver Side
- Replaces: 1L2Z-9431-CA
- Base No.: 9430B
- Item Weight: 10.40 Pounds
- Item Dimensions: 19.8 x 11.2 x 5.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1L2Z-9431-CB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Ford Ranger Submodels:
- Edge, FX4, Sport, STX, Tremor, XL, XLT | 6 Cyl 4.0 L GAS
View related parts
2001 Ford Ranger Exhaust Manifold, Passenger Side
Part Number: 1L5Z-9430-CA
Product Specifications
- Other Name: Manifold Assembly - Exhaust; Exhaust Manifold, Right; Manifold
- Manufacturer Note: RH, Unleaded fuel
- Position: Passenger Side
- Base No.: 9430
- Item Weight: 11.10 Pounds
- Item Dimensions: 19.4 x 9.8 x 5.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1L5Z-9430-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Ford Ranger Submodels:
- Edge, FX4, Sport, STX, Tremor, XL, XLT | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
2001 Ford Ranger Exhaust Manifold
Part Number: 1L5Z-9430-BA
Product Specifications
- Other Name: Manifold Assembly - Exhaust; Manifold
- Manufacturer Note: Attaching Nut W703662,S309, Stud W704474,S309. use with 1l5g,9448,aa gasket, BEFORE 6/6/2002
- Base No.: 9430
- Item Weight: 18.90 Pounds
- Item Dimensions: 18.8 x 9.5 x 5.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1L5Z-9430-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Ford Ranger Submodels:
- XL, XLT | 4 Cyl 2.3 L GAS
View related parts
2001 Ford Ranger Exhaust Manifold
Part Number: F87Z-9430-CA
Product Specifications
- Other Name: Manifold Assembly - Exhaust; Manifold
- Manufacturer Note: Includes fitting F87Z-9F485-BA
- Base No.: 9430
- Item Weight: 13.70 Pounds
- Item Dimensions: 19.6 x 9.9 x 5.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F87Z-9430-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2001 Ford Ranger Submodels:
- Splash, XL, XLT | 4 Cyl 2.5 L GAS

2001 Ford Ranger Exhaust Manifold

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2001 Ford Ranger Exhaust Manifold available at FordPartsDeal.com. You can confidently purchase our OEM 2001 Ford Ranger Exhaust Manifold as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2001 Ford Ranger Exhaust Manifold Parts Questions & Experts Answers

Q: How to service the exhaust manifold on 2001 Ford Ranger?
A: Start the exhaust manifold service by disconnecting both the battery ground cable together with the Intake Air Temperature (IAT) sensor. Begin by removing the air cleaner outlet tube then loosing the two nuts to create space for the transducer. Try to loosen the EGR valve connection at the exhaust manifold before separating it from the EGR valve and follow by disconnecting the three-way catalytic converter from its exhaust manifold position. The service requires front engine lifting eye removal with its supporting nuts before proceeding to discard the eye. Two studs and six bolts need to be uninstalled from the exhaust manifold before removal while you should discard the exhaust manifold gasket. Before mounting the gasket surfaces on the cylinder head and exhaust manifold you must clean them before applying a new exhaust manifold gasket. To reinstall the component follow all steps in reverse order while torquing the six bolts first to 20 - 23 Nm (15 - 16 ft. lbs.) followed by torquing the two studs to 60 - 80 Nm (45 - 59 ft. lbs.) over two separate stages.