My Garage
Cart

OEM 2001 Lincoln LS Yaw Sensor

Yaw Rate Sensor
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Yaw Sensors found

  • 2001 Lincoln LS Yaw Sensor - YW4Z-3C187-AA
    2001 Lincoln LS Yaw Sensor Diagram - YW4Z-3C187-AA
    View related parts
    Product Specifications
    • Other Name: Sensor Assembly
    • Base No.: 3C187
    • Item Weight: 0.30 Pounds
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: YW4Z-3C187-AA
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2001 Lincoln LS Submodels:
    • Base, LSE | 6 Cyl 3.0 L GAS, 8 Cyl 3.9 L GAS
  • 2001 Lincoln LS Yaw Sensor - YW4Z-14B296-AA
    2001 Lincoln LS Yaw Sensor Diagram - YW4Z-14B296-AA
    View related parts
    Product Specifications
    • Other Name: Sensor Assembly
    • Base No.: 14B296
    • Item Weight: 0.80 Pounds
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: YW4Z-14B296-AA
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2001 Lincoln LS Submodels:
    • Base, LSE | 6 Cyl 3.0 L GAS, 8 Cyl 3.9 L GAS

2001 Lincoln LS Yaw Sensor

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2001 Lincoln LS Yaw Sensor available at FordPartsDeal.com. You can confidently purchase our OEM 2001 Lincoln LS Yaw Sensor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2001 Lincoln LS Yaw Sensor Parts Q&A

  • Q: How to Service and Repair the Yaw Sensor on 2001 Lincoln LS?
    A: The service and repair of the yaw rate sensor requires starting with floor console removal alongside the center A/C duct. Start by disconnecting the plug connector of the yaw rate sensor before removing it with the help of its retaining bolts. Attention should be given to place the yaw rate sensor with its connector on the left side of the vehicle during installation while reversing the removal sequence for installation. After every time a component is disconnected or moved or a new component gets installed the stability assist module requires recalibration following specific instructions which ought to be obtained separately.