Is the evaporator core separately serviceable, and what steps should be taken when repairing the refrigerant system on 2002 Ford Crown Victoria?

With its housing assembly, the core of the evaporator should be replaced. The suction accumulator is only replaced in case it is contaminated or damaged. In case of the leak suspicion, first test it and then remove. Take off the housing, assemble the components on to the new one and fit the new evaporator core housing.

OEM 2002 Ford Crown Victoria Evaporator

A/C Evaporator Core

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Evaporator found

View related parts
2002 Ford Crown Victoria Evaporator Core, Driver Side Part Number: 1W1Z-19850-CA
Product Specifications
- Other Name: Evaporator Assembly; A/C Evaporator Core Repair Kit; A/C Evaporator; Housing Assembly; Case Assembly; Case; Housing
- Manufacturer Note: FROM 5/1/01
- Position: Driver Side
- Base No.: 19A553
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1W1Z-19850-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Ford Crown Victoria Submodels:
- Base, LWB, LX, Police Interceptor, S, Touring Sedan | 8 Cyl 4.6 L CNG, 8 Cyl 4.6 L GAS

2002 Ford Crown Victoria Evaporator

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2002 Ford Crown Victoria Evaporator available at FordPartsDeal.com. You can confidently purchase our OEM 2002 Ford Crown Victoria Evaporator as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2002 Ford Crown Victoria Evaporator Parts Q&A

Q: Is the evaporator core separately serviceable, and what steps should be taken when repairing the refrigerant system on 2002 Ford Crown Victoria?
A: With its housing assembly, the core of the evaporator should be replaced. The suction accumulator is only replaced in case it is contaminated or damaged. In case of the leak suspicion, first test it and then remove. Take off the housing, assemble the components on to the new one and fit the new evaporator core housing.