Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2002 Ford Excursion Brake Master Cylinder

  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Master Cylinder found

  • 2002 Ford Excursion Brake Master Cylinder - 5C3Z-2140-LB
    2002 Ford Excursion Brake Master Cylinder Diagram - 5C3Z-2140-LB
    View related parts

    2002 Ford Excursion Master Cylinder
    Part Number: 5C3Z-2140-LB

    Product Specifications
    • Other Name: Cylinder Assembly - Master; Brake Master Cylinder
    • Base No.: 2140
    • Item Weight: 4.00 Pounds
    • Item Dimensions: 10.5 x 7.9 x 9.1 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 5C3Z-2140-LB
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2002 Ford Excursion Submodels:
    • Eddie Bauer, Limited, XLS, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL

2002 Ford Excursion Brake Master Cylinder

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2002 Ford Excursion Brake Master Cylinder available at FordPartsDeal.com. You can confidently purchase our OEM 2002 Ford Excursion Brake Master Cylinder as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2002 Ford Excursion Brake Master Cylinder Parts Questions & Experts Answers

  • Q: How to service and repair the brake master cylinder on 2002 Ford Excursion?
    A: The brake master cylinder service requires you to start by detaching the battery ground cable. Begin with the removal of air cleaner housing and fluid level sensor connector separation and move on to disconnect brake pressure switch connector whenever sensors are included. The next action is to remove the brake tubes. Vehicles with Hydro-Boost require the removal of power steering tube bracket nuts and the power steering tubes must be disconnected. Finish these steps and unfasten the brake master cylinder nuts before pulling out the brake master cylinder from its place. The installation process of the new or repaired brake master cylinder requires reversing the steps for removal. Bleeding the brake system along with the Hydro-Boost system must be performed to validate system functionality.

Related 2002 Ford Excursion Parts

Alternate Year Models

+
2001 Ford Excursion Brake Master Cylinder 2003 Ford Excursion Brake Master Cylinder