How to service and repair the brake pedal assembly on 2002 Ford Excursion?

The first step for serving and repairing the brake pedal assembly consists of removing the fuse panel cover and disconnecting the battery ground cable. Carefully remove the stoplight switch retaining pin then slide out the stoplight switch combined with booster push rod from the brake pedal pin. Vehicles with adjustable pedals should keep the brake pedal at matching positions as the accelerator pedal either straight forward or straight back before any removal steps. The removal of memory adjustable pedal components starts with removing the wiring harness and motor assembly together with their attached cable. Begin the brake pedal-to-accelerator pedal cable detachment through retainer cable pull and then disconnect the brake pedal motor electrical connector. Brake pedal retaining parts should be removed before extracting the pedal assembly with its bracket while moving the brake booster assembly out of position. The installation process requires that both brake pedal and accelerator pedal maintain their original position at complete rearward position before following the removal steps in reverse order.

OEM 2002 Ford Excursion Brake Pedal

Brake Pedal Pad

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Brake Pedals found

View related parts
2002 Ford Excursion Pedal Assembly
Part Number: YC3Z-2455-BA
$33.72 MSRP: $46.64
You Save: $12.92 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pedal Assembly - Brake; Brake Pedal Assembly
- Base No.: 2455
- Item Weight: 5.10 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YC3Z-2455-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Ford Excursion Submodels:
- Eddie Bauer, Limited, XLT | 8 Cyl 7.3 L DIESEL
View related parts
2002 Ford Excursion Pedal Assembly
Part Number: 2C3Z-2455-FCRM
Product Specifications
- Other Name: Pedal Assembly - Brake; Brake Pedal Assembly
- Replaces: 2C3Z-2455-FB, 2C3Z-2455-FC
- Base No.: 2455
- Item Weight: 5.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2C3Z-2455-FCRM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Ford Excursion Submodels:
- Eddie Bauer, Limited, XLS, XLT | 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL
View related parts
2002 Ford Excursion Pedal Assembly
Part Number: 2C3Z-2455-EBRM
Product Specifications
- Other Name: Pedal Assembly - Brake; Brake Pedal Assembly
- Replaces: 2C3Z-2455-EB
- Base No.: 2455
- Item Weight: 7.90 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2C3Z-2455-EBRM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Ford Excursion Submodels:
- Eddie Bauer, Limited, XLS, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS
View related parts
2002 Ford Excursion Pedal Assembly
Part Number: YC3Z-2455-AA
Product Specifications
- Other Name: Pedal Assembly - Brake; Brake Pedal Assembly
- Base No.: 2455
- Item Weight: 6.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YC3Z-2455-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Ford Excursion Submodels:
- Eddie Bauer, Limited, XLS, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS

2002 Ford Excursion Brake Pedal

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2002 Ford Excursion Brake Pedal available at FordPartsDeal.com. You can confidently purchase our OEM 2002 Ford Excursion Brake Pedal as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2002 Ford Excursion Brake Pedal Parts Questions & Experts Answers

Q: How to service and repair the brake pedal assembly on 2002 Ford Excursion?
A: The first step for serving and repairing the brake pedal assembly consists of removing the fuse panel cover and disconnecting the battery ground cable. Carefully remove the stoplight switch retaining pin then slide out the stoplight switch combined with booster push rod from the brake pedal pin. Vehicles with adjustable pedals should keep the brake pedal at matching positions as the accelerator pedal either straight forward or straight back before any removal steps. The removal of memory adjustable pedal components starts with removing the wiring harness and motor assembly together with their attached cable. Begin the brake pedal-to-accelerator pedal cable detachment through retainer cable pull and then disconnect the brake pedal motor electrical connector. Brake pedal retaining parts should be removed before extracting the pedal assembly with its bracket while moving the brake booster assembly out of position. The installation process requires that both brake pedal and accelerator pedal maintain their original position at complete rearward position before following the removal steps in reverse order.