How to service the vacuum brake booster on 2002 Ford F-150?

A service of vacuum brake booster begins with removing the brake master cylinder followed by disconnecting the power brake booster hose through clamp compression. Start by taking out the stoplight switch self-locking pin and moving the stoplight switch along with booster push rod off the brake pedal pin. You must first remove the bulkhead sound insulator before detaching the power brake booster by removing its nuts. The installation process should be the exact opposite of what was required for removal.

OEM 2002 Ford F-150 Brake Booster

Brake Power Booster

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Booster found

View related parts
2002 Ford F-150 Brake Booster
Part Number: 5L3Z-2005-BA
Product Specifications
- Other Name: Booster Assembly - Brake; Power Brake Booster; Booster Assembly
- Replaces: XL3Z-2005-CA
- Base No.: 2005
- Item Weight: 14.40 Pounds
- Item Dimensions: 17.1 x 12.8 x 12.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5L3Z-2005-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Ford F-150 Submodels:
- Base, FX4, Harley-Davidson Edition, King Ranch, Lariat, Lightning, STX, XL, XLT | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS

2002 Ford F-150 Brake Booster

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2002 Ford F-150 Brake Booster available at FordPartsDeal.com. You can confidently purchase our OEM 2002 Ford F-150 Brake Booster as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2002 Ford F-150 Brake Booster Parts Questions & Experts Answers

Q: How to service the vacuum brake booster on 2002 Ford F-150?
A: A service of vacuum brake booster begins with removing the brake master cylinder followed by disconnecting the power brake booster hose through clamp compression. Start by taking out the stoplight switch self-locking pin and moving the stoplight switch along with booster push rod off the brake pedal pin. You must first remove the bulkhead sound insulator before detaching the power brake booster by removing its nuts. The installation process should be the exact opposite of what was required for removal.