How to Service and Repair a Brake Disc on 2002 Ford F-150?

Service and repair of the brake rotor/disc starts with anchor plate removal of the front disc brake caliper. 4x4 vehicle owners must extract the brake disc from their vehicles. Service and repair of the brake disc and hub require 4x2 vehicle owners to begin by removing the hub grease cap followed by the cotter pin before accessing the nut retainer and spindle nut and front wheel outer bearing retainer washer and outer front wheel bearing and finally the brake disc and hub. 4x2 vehicle owners must remove the front wheel bearing when needed by extracting both the wheel hub grease seal and the front wheel bearing. First install the brake disc onto the wheel hub of 4x4 vehicles while properly cleaning both components with Metal Brake Parts Cleaner F3AZ-19579-SA or its equal. The procedure for 4x2 vehicles requires full cleaning and complete inspection of the front wheel bearings alongside brake disc and hub while using Metal Brake Parts Cleaner F3AZ-19579-SA as an equivalent product. The installation includes application of Premium Long-Life Grease XG-1-C or -K or equivalent to front wheel bearings followed by the installation of new wheel hub grease seals and placement of inner front wheel bearing last with another new wheel hub grease seal. Position the brake disc and hub after you have installed the outer front wheel bearing and the front wheel outer bearing retainer washer together with the spindle nut. During the brake disc and hub rotation follow these steps: first tighten the spindle nut then loosen it two turns before final tightening while continuing the rotation. Double-tighten the spindle nut with rotation movements followed by single turns of loosening then double-tighten while rotating the nut once more. The front disc brake caliper anchor plate installation should be followed by attaching the nut retainer, cotter pin and hub grease cap for 4x2 vehicles.

OEM 2002 Ford F-150 Brake Disc

Disc Rotor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Brake Discs found

View related parts
2002 Ford F-150 Rotor, Front
Part Number: YL3Z-1V125-DB
$82.86 MSRP: $124.98
You Save: $42.12 (34%)
ADD TO CART
Product Specifications
- Other Name: Rotor Assembly; Disc Brake Rotor, Front; Disc Brake Rotor; Brake Rotor
- Position: Front
- Replaces: BRRF-73, BRR-62, YL3Z-1V125-DA, XL3Z-1125-CB
- Base No.: 1V125
- Item Weight: 40.80 Pounds
- Item Dimensions: 3.2 x 13.0 x 13.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YL3Z-1V125-DB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Ford F-150 Submodels:
- Base, FX4, Harley-Davidson Edition, King Ranch, Lariat, Lightning, STX, XL, XLT | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
View related parts
2002 Ford F-150 Rotor, Rear
Part Number: 2U2Z-1V125-AB
$81.21 MSRP: $124.98
You Save: $43.77 (36%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Rotor Assembly; Disc Brake Rotor, Rear; Disc Brake Rotor; Brake Rotor
- Position: Rear
- Replaced by: 2U2Z-1V125-A
- Item Weight: 19.80 Pounds
- Item Dimensions: 3.3 x 14.3 x 14.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2U2Z-1V125-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Ford F-150 Submodels:
- Base, Harley-Davidson Edition, King Ranch, Lariat, Lightning, XL, XLT | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
View related parts
2002 Ford F-150 Front Hub
Part Number: 2U2Z-1V102-AC
$82.86 MSRP: $124.98
You Save: $42.12 (34%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Hub And Disc Assembly; Disc Brake Rotor and Hub Assembly, Front; Wheel Hub Repair Kit; Brake Rotor; Wheel Hub; Hub & Rotor; Rotor
- Position: Front
- Replaced by: 2U2Z-1V102-AD
- Item Weight: 29.60 Pounds
- Item Dimensions: 5.3 x 13.3 x 13.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2U2Z-1V102-AC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Ford F-150 Submodels:
- Base, Harley-Davidson Edition, King Ranch, Lariat, Lightning, STX, XL, XLT | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
View related parts
2002 Ford F-150 Rotor, Front
Part Number: XL3Z-1125-BA
Product Specifications
- Other Name: Rotor Assembly; Disc Brake Rotor, Front; Brake Rotor
- Manufacturer Note: Rotor
- Position: Front
- Item Weight: 17.30 Pounds
- Item Dimensions: 12.4 x 12.5 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XL3Z-1125-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Ford F-150 Submodels:
- Base, FX4, Harley-Davidson Edition, King Ranch, Lariat, Lightning, STX, XL, XLT | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
View related parts
2002 Ford F-150 Hub & Rotor, Front
Part Number: YL3Z-1102-AB
Product Specifications
- Other Name: Hub Assembly - Wheel; Disc Brake Rotor and Hub Assembly, Front; Wheel Hub Repair Kit; Brake Rotor; Wheel Hub
- Manufacturer Note: Hub and rotor asy. - M14 wheel bolts - F150 w/ Total Performance Package (Lightning) - with 4 wheel ABS - 2000/ - FROM 11/29/99
- Position: Front
- Item Weight: 28.20 Pounds
- Item Dimensions: 14.3 x 14.1 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YL3Z-1102-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Ford F-150 Submodels:
- Base, Harley-Davidson Edition, King Ranch, Lariat, Lightning, XL, XLT | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
View related parts
2002 Ford F-150 Rotor, Rear
Part Number: XL3Z-2C026-DA
Product Specifications
- Other Name: Rotor Assembly - Brake; Disc Brake Rotor, Rear; Disc - Brake; Disc Brake Rotor; Brake Rotor
- Position: Rear
- Base No.: 2C026
- Item Weight: 20.70 Pounds
- Item Dimensions: 13.7 x 13.3 x 3.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: XL3Z-2C026-DA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Ford F-150 Submodels:
- Base, FX4, Harley-Davidson Edition, King Ranch, Lariat, Lightning, STX, XL, XLT | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
View related parts
2002 Ford F-150 Front Hub
Part Number: XL3Z-1102-BA
Product Specifications
- Other Name: Hub And Bearing Assembly; Wheel Hub Repair Kit; Brake Rotor; Wheel Hub; Hub & Rotor
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XL3Z-1102-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following 2002 Ford F-150 Submodels:
- Base, Harley-Davidson Edition, King Ranch, Lariat, Lightning, XL, XLT | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS

2002 Ford F-150 Brake Disc

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2002 Ford F-150 Brake Disc available at FordPartsDeal.com. You can confidently purchase our OEM 2002 Ford F-150 Brake Disc as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2002 Ford F-150 Brake Disc Parts Questions & Experts Answers

Q: How to Service and Repair a Brake Disc on 2002 Ford F-150?
A: Service and repair of the brake rotor/disc starts with anchor plate removal of the front disc brake caliper. 4x4 vehicle owners must extract the brake disc from their vehicles. Service and repair of the brake disc and hub require 4x2 vehicle owners to begin by removing the hub grease cap followed by the cotter pin before accessing the nut retainer and spindle nut and front wheel outer bearing retainer washer and outer front wheel bearing and finally the brake disc and hub. 4x2 vehicle owners must remove the front wheel bearing when needed by extracting both the wheel hub grease seal and the front wheel bearing. First install the brake disc onto the wheel hub of 4x4 vehicles while properly cleaning both components with Metal Brake Parts Cleaner F3AZ-19579-SA or its equal. The procedure for 4x2 vehicles requires full cleaning and complete inspection of the front wheel bearings alongside brake disc and hub while using Metal Brake Parts Cleaner F3AZ-19579-SA as an equivalent product. The installation includes application of Premium Long-Life Grease XG-1-C or -K or equivalent to front wheel bearings followed by the installation of new wheel hub grease seals and placement of inner front wheel bearing last with another new wheel hub grease seal. Position the brake disc and hub after you have installed the outer front wheel bearing and the front wheel outer bearing retainer washer together with the spindle nut. During the brake disc and hub rotation follow these steps: first tighten the spindle nut then loosen it two turns before final tightening while continuing the rotation. Double-tighten the spindle nut with rotation movements followed by single turns of loosening then double-tighten while rotating the nut once more. The front disc brake caliper anchor plate installation should be followed by attaching the nut retainer, cotter pin and hub grease cap for 4x2 vehicles.