How to Service and Repair a Brake Disc on 2003 Ford F-150?

Brake rotor/disc repair and servicing starts with unfastening the front disc brake caliper anchor plate. Front 4x4 vehicle owners must remove the brake disk component from the hub. 4x2 vehicle brake disc removal starts with removing the hub grease cap before the cotter pin, nut retainer, spindle nut, front wheel outer bearing retainer washer then outer front wheel bearings until the brake disc and hub become accessible. The front wheel bearing removal process starts with discarding the wheel hub grease seal followed by disassembly of the front wheel bearing. Installation of brake disc wheel hubs on 4x4 vehicles requires Metal Brake Parts Cleaner F3AZ-19579-SA or its equivalent to clean the brake disc together with the hub. The front wheel bearing inspection along with brake disc and hub assessment must be performed on 4x2 vehicles using Metal Brake Parts Cleaner F3AZ-19579-SA or an equivalent product. The front wheel bearings require Premium Long-Life Grease XG-1-C or -K from ESA-M1C75-B Ford specification for lubrication before installing a new wheel hub grease seal. After cleaning the hub you should install the new wheel hub grease seal together with the inner front wheel bearing. Place the brake disc and hub in position to put on the outer front wheel bearing followed by a front wheel outer bearing retainer washer and spindle nut. To install the brake disc along with hub you should first tighten the spindle nut and then loosen it by two turns during brake disc rotation. Continue by repeating the tightening sequence while you turn the brake disc and ensure another loosen-up and retightening step. 4x2 vehicle maintenance requires workers to fit the nut retainer and cotter pin beside the hub grease cap before installing the front disc brake caliper anchor plate.

OEM 2003 Ford F-150 Brake Disc

Disc Rotor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Brake Discs found

View related parts
2003 Ford F-150 Rotor, Front Part Number: YL3Z-1V125-DB
$88.39 MSRP: $133.32
You Save: $44.93 (34%)
ADD TO CART
Product Specifications
- Other Name: Rotor Assembly; Disc Brake Rotor, Front; Disc Brake Rotor; Brake Rotor
- Position: Front
- Replaces: BRRF-73, BRR-62, YL3Z-1V125-DA, XL3Z-1125-CB
- Base No.: 1V125
- Item Weight: 40.80 Pounds
- Item Dimensions: 3.2 x 13.0 x 13.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YL3Z-1V125-DB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Ford F-150 Submodels:
- Base, FX4, Harley-Davidson Edition, King Ranch, Lariat, Lightning, STX, XL, XLT | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
View related parts
2003 Ford F-150 Rotor, Rear Part Number: 2U2Z-1V125-AB
$86.63 MSRP: $133.32
You Save: $46.69 (36%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Rotor Assembly; Disc Brake Rotor, Rear; Disc Brake Rotor; Brake Rotor
- Position: Rear
- Replaced by: 2U2Z-1V125-A
- Item Weight: 19.80 Pounds
- Item Dimensions: 3.3 x 14.3 x 14.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2U2Z-1V125-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Ford F-150 Submodels:
- Base, Harley-Davidson Edition, King Ranch, Lariat, Lightning, XL, XLT | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
View related parts
2003 Ford F-150 Front Hub Part Number: 2U2Z-1V102-AC
$88.39 MSRP: $133.32
You Save: $44.93 (34%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Hub And Disc Assembly; Disc Brake Rotor and Hub Assembly, Front; Wheel Hub Repair Kit; Brake Rotor; Wheel Hub; Hub & Rotor; Rotor
- Position: Front
- Replaced by: 2U2Z-1V102-AD
- Item Weight: 29.60 Pounds
- Item Dimensions: 5.3 x 13.3 x 13.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2U2Z-1V102-AC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Ford F-150 Submodels:
- Base, Harley-Davidson Edition, King Ranch, Lariat, Lightning, STX, XL, XLT | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
View related parts
2003 Ford F-150 Rotor, Front Part Number: XL3Z-1125-BA
Product Specifications
- Other Name: Rotor Assembly; Disc Brake Rotor, Front; Brake Rotor
- Manufacturer Note: Rotor
- Position: Front
- Item Weight: 17.30 Pounds
- Item Dimensions: 12.4 x 12.5 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XL3Z-1125-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Ford F-150 Submodels:
- Base, FX4, Harley-Davidson Edition, King Ranch, Lariat, Lightning, STX, XL, XLT | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
View related parts
2003 Ford F-150 Hub & Rotor, Front Part Number: YL3Z-1102-AB
Product Specifications
- Other Name: Hub Assembly - Wheel; Disc Brake Rotor and Hub Assembly, Front; Wheel Hub Repair Kit; Brake Rotor; Wheel Hub
- Manufacturer Note: Hub and rotor asy. - M14 wheel bolts - F150 w/ Total Performance Package (Lightning) - with 4 wheel ABS - 2000/ - FROM 11/29/99
- Position: Front
- Item Weight: 28.20 Pounds
- Item Dimensions: 14.3 x 14.1 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YL3Z-1102-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Ford F-150 Submodels:
- Base, Harley-Davidson Edition, King Ranch, Lariat, Lightning, XL, XLT | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
View related parts
2003 Ford F-150 Rotor, Rear Part Number: XL3Z-2C026-DA
Product Specifications
- Other Name: Rotor Assembly - Brake; Disc Brake Rotor, Rear; Disc - Brake; Disc Brake Rotor; Brake Rotor
- Position: Rear
- Base No.: 2C026
- Item Weight: 20.70 Pounds
- Item Dimensions: 13.7 x 13.3 x 3.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: XL3Z-2C026-DA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Ford F-150 Submodels:
- Base, FX4, Harley-Davidson Edition, King Ranch, Lariat, Lightning, STX, XL, XLT | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
View related parts
2003 Ford F-150 Front Hub Part Number: XL3Z-1102-BA
Product Specifications
- Other Name: Hub And Bearing Assembly; Wheel Hub Repair Kit; Brake Rotor; Wheel Hub; Hub & Rotor
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XL3Z-1102-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following 2003 Ford F-150 Submodels:
- Base, Harley-Davidson Edition, King Ranch, Lariat, Lightning, XL, XLT | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS

2003 Ford F-150 Brake Disc

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2003 Ford F-150 Brake Disc available at FordPartsDeal.com. You can confidently purchase our OEM 2003 Ford F-150 Brake Disc as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2003 Ford F-150 Brake Disc Parts Q&A

Q: How to Service and Repair a Brake Disc on 2003 Ford F-150?
A: Brake rotor/disc repair and servicing starts with unfastening the front disc brake caliper anchor plate. Front 4x4 vehicle owners must remove the brake disk component from the hub. 4x2 vehicle brake disc removal starts with removing the hub grease cap before the cotter pin, nut retainer, spindle nut, front wheel outer bearing retainer washer then outer front wheel bearings until the brake disc and hub become accessible. The front wheel bearing removal process starts with discarding the wheel hub grease seal followed by disassembly of the front wheel bearing. Installation of brake disc wheel hubs on 4x4 vehicles requires Metal Brake Parts Cleaner F3AZ-19579-SA or its equivalent to clean the brake disc together with the hub. The front wheel bearing inspection along with brake disc and hub assessment must be performed on 4x2 vehicles using Metal Brake Parts Cleaner F3AZ-19579-SA or an equivalent product. The front wheel bearings require Premium Long-Life Grease XG-1-C or -K from ESA-M1C75-B Ford specification for lubrication before installing a new wheel hub grease seal. After cleaning the hub you should install the new wheel hub grease seal together with the inner front wheel bearing. Place the brake disc and hub in position to put on the outer front wheel bearing followed by a front wheel outer bearing retainer washer and spindle nut. To install the brake disc along with hub you should first tighten the spindle nut and then loosen it by two turns during brake disc rotation. Continue by repeating the tightening sequence while you turn the brake disc and ensure another loosen-up and retightening step. 4x2 vehicle maintenance requires workers to fit the nut retainer and cotter pin beside the hub grease cap before installing the front disc brake caliper anchor plate.