How to service and repair the fuel filler hose on 2002 Ford Focus?

Service and repair of the fuel filler hose begins with removing the right-hand rear wheel nuts while disconnecting the battery ground cable. The processing begins by taking off the fuel filler cap followed by vehicle lift and support before the technician removes the right-hand rear wheel with its splash shield. The service requires removing both vent pipes and filler pipe from the fuel tank while protecting the filler pipes from damage by avoiding sharp tools. Keep track of how the retaining clamp and clip should be positioned when reinstalling. You should disconnect the canister vent solenoid tube while paying attention to keeping it damage-free before unscrewing the two bolts on the fuel filler pipe. To install the system require reverse steps of removal while putting back the fuel filler and vent pipe retaining clamp and clips into their original placement. The final step includes conducting an evaporative emission system leak test for proper system functionality assessment.

OEM 2002 Ford Focus Fuel Filler Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Fuel Filler Hoses found

View related parts
2002 Ford Focus Filler Neck Part Number: 2M5Z-9034-CA
Product Specifications
- Other Name: Pipe - Fuel Filler; Fuel Filler Neck; Fuel Tank Filler Neck; Fuel Filler Hose; Filler Pipe
- Manufacturer Note: 4 Door Wagon
- Replaces: YS4Z-9034-HA
- Base No.: 9032
- Item Weight: 7.70 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2M5Z-9034-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Ford Focus Submodels:
- SE, ZTW | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
2002 Ford Focus Filler Neck Part Number: 2M5Z-9034-BA
Product Specifications
- Other Name: Pipe - Fuel Filler; Fuel Filler Neck; Fuel Tank Filler Neck; Fuel Filler Hose; Filler Pipe
- Manufacturer Note: 4 Door Sedan
- Replaces: YS4Z-9034-GA
- Base No.: 9034
- Item Weight: 1.80 Pounds
- Item Dimensions: 30.9 x 5.8 x 11.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2M5Z-9034-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Ford Focus Submodels:
- LX, SE, Sony Limited Edition, ZTS | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
2002 Ford Focus Filler Neck Part Number: 2M5Z-9034-AA
Product Specifications
- Other Name: Pipe - Fuel Filler; Fuel Filler Neck; Fuel Tank Filler Neck; Fuel Filler Hose; Filler Pipe
- Manufacturer Note: Pipe asy - fuel filler, 3 door and 5 door sedan
- Replaces: YS4Z-9034-AA
- Base No.: 9034
- Item Weight: 1.80 Pounds
- Item Dimensions: 30.9 x 6.0 x 11.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2M5Z-9034-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Ford Focus Submodels:
- SVT, ZX3, ZX5 | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS

2002 Ford Focus Fuel Filler Hose

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2002 Ford Focus Fuel Filler Hose available at FordPartsDeal.com. You can confidently purchase our OEM 2002 Ford Focus Fuel Filler Hose as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2002 Ford Focus Fuel Filler Hose Parts Q&A

Q: How to service and repair the fuel filler hose on 2002 Ford Focus?
A: Service and repair of the fuel filler hose begins with removing the right-hand rear wheel nuts while disconnecting the battery ground cable. The processing begins by taking off the fuel filler cap followed by vehicle lift and support before the technician removes the right-hand rear wheel with its splash shield. The service requires removing both vent pipes and filler pipe from the fuel tank while protecting the filler pipes from damage by avoiding sharp tools. Keep track of how the retaining clamp and clip should be positioned when reinstalling. You should disconnect the canister vent solenoid tube while paying attention to keeping it damage-free before unscrewing the two bolts on the fuel filler pipe. To install the system require reverse steps of removal while putting back the fuel filler and vent pipe retaining clamp and clips into their original placement. The final step includes conducting an evaporative emission system leak test for proper system functionality assessment.