How to service and repair the lower control arm on 2002 Ford Windstar?

The service and repair process for lower control arms starts with the recognition of essential suspension fasteners which determine system performance so you must replace them with the original part number or a suitable equivalent unless you find inferior replacement parts on the market. You should start with the wheel and tire assembly when the steering wheel stays unlocked. The service and repair process starts by discarding the ball joint pinch bolt and nut as you apply a pry bar on the front subframe to push down until the lower ball joint releases from the front wheel knuckle. The lower control arm must be detached using first a discarded nut and bolt and then additional nut and bolt. The reinstallation process should avoid tightening the front suspension lower arm nuts and bolts until the vehicle obtains full weight-bearing suspension capacity. Reinstall all fasteners and afterward verify the front end alignment then adjust it when needed.

OEM 2002 Ford Windstar Control Arm

Suspension Arm

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Control Arms found

View related parts
2002 Ford Windstar Lower Control Arm, Front Driver Side
Part Number: 1F2Z-3079-AA
Product Specifications
- Other Name: Arm Assembly - Front Suspension; Suspension Control Arm and Ball Joint Assembly; Control Arm Assembly; Control Arm
- Manufacturer Note: L.H., Lower
- Position: Front Lower Driver Side
- Replaces: XF2Z-3079-FA
- Base No.: 3079
- Item Weight: 10.30 Pounds
- Item Dimensions: 3.3 x 16.7 x 18.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1F2Z-3079-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Ford Windstar Submodels:
- 3.0L, Base, Limited, LX, SE, SE Sport, SEL | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
View related parts
2002 Ford Windstar Lower Control Arm, Front Passenger Side
Part Number: 1F2Z-3078-AA
Product Specifications
- Other Name: Arm Assembly - Front Suspension; Suspension Control Arm and Ball Joint Assembly; Control Arm Assembly; Control Arm
- Manufacturer Note: R.H., Lower
- Position: Front Passenger Side
- Replaces: XF2Z-3078-FA
- Base No.: 3078
- Item Weight: 13.20 Pounds
- Item Dimensions: 22.4 x 18.2 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1F2Z-3078-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Ford Windstar Submodels:
- 3.0L, Base, Limited, LX, SE, SE Sport, SEL | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS

2002 Ford Windstar Control Arm

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2002 Ford Windstar Control Arm available at FordPartsDeal.com. You can confidently purchase our OEM 2002 Ford Windstar Control Arm as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2002 Ford Windstar Control Arm Parts Questions & Experts Answers

Q: How to service and repair the lower control arm on 2002 Ford Windstar?
A: The service and repair process for lower control arms starts with the recognition of essential suspension fasteners which determine system performance so you must replace them with the original part number or a suitable equivalent unless you find inferior replacement parts on the market. You should start with the wheel and tire assembly when the steering wheel stays unlocked. The service and repair process starts by discarding the ball joint pinch bolt and nut as you apply a pry bar on the front subframe to push down until the lower ball joint releases from the front wheel knuckle. The lower control arm must be detached using first a discarded nut and bolt and then additional nut and bolt. The reinstallation process should avoid tightening the front suspension lower arm nuts and bolts until the vehicle obtains full weight-bearing suspension capacity. Reinstall all fasteners and afterward verify the front end alignment then adjust it when needed.